Process library
What each operation costs, before anyone asks you for a number.
Specific energy consumption and scrap rate for 101 manufacturing operations. Every figure is a band rather than a point, because a screening figure that pretends to be exact is worse than one that admits what it is — and each page says what decides where in the band a particular plant sits.
These are screening models, not measurements. No government publishes the kilowatt-hours a particular moulding machine draws, so these are ranges from process-engineering literature and industry benchmarking, carried at modelled tier throughout and never presented as source-read. Every one exists to be replaced by a reading off your own switchboard — the prototype asks for that reading first.
Forming and moulding
| Operation | Electricity | Scrap | Bought per kg shipped |
|---|---|---|---|
| Calendering | 0.3–1.2 kWh/kg | 3–10% | 1.03–1.11 kg |
| Compression moulding | 0.5–1.8 kWh/kg | 2–10% | 1.02–1.11 kg |
| Container forming (blow and blow, press and blow) | 0.15–0.5 kWh/kg | 3–12% | 1.03–1.14 kg |
| Corrugating and case making | 0.15–0.7 kWh/kg | 4–15% | 1.04–1.18 kg |
| Dry and isostatic pressing | 0.1–0.6 kWh/kg | 2–8% | 1.02–1.09 kg |
| Extrusion blow moulding | 0.7–2.2 kWh/kg | 5–20% | 1.05–1.25 kg |
| Filament winding | 0.4–2 kWh/kg | 3–10% | 1.03–1.11 kg |
| Film extrusion (blown or cast) | 0.4–1.4 kWh/kg | 3–12% | 1.03–1.14 kg |
| Foam board lamination (XPS, PIR) | 0.4–2 kWh/kg | 3–12% | 1.03–1.14 kg |
| Foaming / expansion | 0.5–2.5 kWh/kg | 3–15% | 1.03–1.18 kg |
| Injection moulding | 0.6–2.5 kWh/kg | 2–8% | 1.02–1.09 kg |
| Injection stretch blow moulding (bottles) | 0.5–1.6 kWh/kg | 1–5% | 1.01–1.05 kg |
| Papermaking | 0.5–2.5 kWh/kg | 3–12% | 1.03–1.14 kg |
| Profile or sheet extrusion | 0.3–1.1 kWh/kg | 2–8% | 1.02–1.09 kg |
| Pultrusion / composite lay-up | 0.5–3 kWh/kg | 5–20% | 1.05–1.25 kg |
| Resin transfer moulding and infusion | 0.5–3 kWh/kg | 5–20% | 1.05–1.25 kg |
| Rotational moulding | 1.2–4 kWh/kg | 2–8% | 1.02–1.09 kg |
| Slip casting | 0.3–1.2 kWh/kg | 5–20% | 1.05–1.25 kg |
| Tabletting and encapsulation | 0.05–0.4 kWh/kg | 1–5% | 1.01–1.05 kg |
| Thermoforming | 0.4–1.5 kWh/kg | 15–40% | 1.18–1.67 kg |
Heating, drying and firing
| Operation | Electricity | Scrap | Bought per kg shipped |
|---|---|---|---|
| Annealing and toughening | 0.2–0.7 kWh/kg | 1–5% | 1.01–1.05 kg |
| Autoclave and prepreg cure | 2–12 kWh/kg | 8–30% | 1.09–1.43 kg |
| Baking / roasting / frying | 0.3–2 kWh/kg | 2–10% | 1.02–1.11 kg |
| Chilling / freezing | 0.05–0.5 kWh/kg | 0.5–3% | 1.01–1.03 kg |
| Curing / stoving oven | 0.1–0.8 kWh/kg | 1–5% | 1.01–1.05 kg |
| Drying (hot air or oven) | 0.2–2.5 kWh/kg | 0.5–3% | 1.01–1.03 kg |
| Extrusion cooking | 0.15–0.8 kWh/kg | 2–8% | 1.02–1.09 kg |
| Freezing and chilling | 0.08–0.4 kWh/kg | 0.5–3% | 1.01–1.03 kg |
| Glass melting | 1.1–1.9 kWh/kg | 2–8% | 1.02–1.09 kg |
| Kiln firing (ceramic, lime) | 0.8–4 kWh/kg | 2–10% | 1.02–1.11 kg |
| Melting / compounding | 0.15–0.6 kWh/kg | 1–5% | 1.01–1.05 kg |
| Mineral wool fiberising | 1.5–6 kWh/kg | 5–20% | 1.05–1.25 kg |
| Pasteurising / sterilising / retort | 0.05–0.6 kWh/kg | 1–5% | 1.01–1.05 kg |
| Reflow and wave soldering | 0.3–1.5 kWh/kg | 0.2–2% | 1.00–1.02 kg |
| Resin pre-drying (desiccant) | 0.05–0.4 kWh/kg | 0.0–1% | 1.00–1.01 kg |
| Spray drying | 1–6 kWh/kg | 2–10% | 1.02–1.11 kg |
| Sterilisation and autoclaving | 0.2–1.5 kWh/kg | 0.5–3% | 1.01–1.03 kg |
Separation and recovery
| Operation | Electricity | Scrap | Bought per kg shipped |
|---|---|---|---|
| Absorption and stripping | 0.1–2 kWh/kg | 1–5% | 1.01–1.05 kg |
| Centrifugation | 0.05–0.5 kWh/kg | 0.5–4% | 1.01–1.04 kg |
| Cleaning / CIP / washing | 0.05–0.8 kWh/kg | 0.5–5% | 1.01–1.05 kg |
| Crystallisation | 0.05–0.6 kWh/kg | 2–12% | 1.02–1.14 kg |
| Distillation / solvent recovery | 0.3–4 kWh/kg | 1–8% | 1.01–1.09 kg |
| Effluent treatment | 0.02–0.4 kWh/kg | 0.0–2% | 1.00–1.02 kg |
| Evaporation / concentration | 0.3–3 kWh/kg | 0.5–3% | 1.01–1.03 kg |
| Filtration / dewatering | 0.02–0.3 kWh/kg | 1–6% | 1.01–1.06 kg |
| Freeze drying (lyophilisation) | 3–15 kWh/kg | 2–10% | 1.02–1.11 kg |
| Ion exchange and adsorption | 0.02–0.3 kWh/kg | 1–6% | 1.01–1.06 kg |
| Membrane separation | 0.5–6 kWh/kg | 2–15% | 1.02–1.18 kg |
| Solvent extraction | 0.1–1.2 kWh/kg | 2–10% | 1.02–1.11 kg |
Mixing, milling and blending
| Operation | Electricity | Scrap | Bought per kg shipped |
|---|---|---|---|
| Coarse milling and crushing | 0.02–0.15 kWh/kg | 0.5–3% | 1.01–1.03 kg |
| Compounding / masterbatch | 0.15–0.5 kWh/kg | 1–5% | 1.01–1.05 kg |
| Fine grinding and micronising | 0.15–0.9 kWh/kg | 0.5–4% | 1.01–1.04 kg |
| Granulation / agglomeration | 0.1–0.8 kWh/kg | 2–12% | 1.02–1.14 kg |
| Homogenising and high-pressure processing | 0.02–0.3 kWh/kg | 0.5–3% | 1.01–1.03 kg |
| Mixing / blending | 0.01–0.15 kWh/kg | 0.2–2% | 1.00–1.02 kg |
| Pulping / refining | 0.5–2.5 kWh/kg | 5–20% | 1.05–1.25 kg |
| Ready-mix batching | 0.002–0.01 kWh/kg | 1–5% | 1.01–1.05 kg |
Metal forming and finishing
| Operation | Electricity | Scrap | Bought per kg shipped |
|---|---|---|---|
| Additive manufacturing | 3–60 kWh/kg | 2–20% | 1.02–1.25 kg |
| Casting (route not stated) | 0.5–3 kWh/kg | 5–35% | 1.05–1.54 kg |
| Forging | 0.5–2.5 kWh/kg | 5–25% | 1.05–1.33 kg |
| Heat treatment / annealing | 0.2–1.5 kWh/kg | 0.5–3% | 1.01–1.03 kg |
| High-pressure die casting | 1.2–4.5 kWh/kg | 10–35% | 1.11–1.54 kg |
| Investment casting | 4–15 kWh/kg | 20–50% | 1.25–2.00 kg |
| Machining | 0.3–3 kWh/kg | 15–70% | 1.18–3.33 kg |
| Rolling / drawing | 0.2–1.5 kWh/kg | 2–10% | 1.02–1.11 kg |
| Sand casting | 1.5–6 kWh/kg | 30–60% | 1.43–2.50 kg |
| Sintering / powder metallurgy | 1–4 kWh/kg | 2–8% | 1.02–1.09 kg |
| Stamping / pressing | 0.05–0.5 kWh/kg | 10–45% | 1.11–1.82 kg |
| Welding / joining | 0.1–1.5 kWh/kg | 1–6% | 1.01–1.06 kg |
Reaction and conversion
| Operation | Electricity | Scrap | Bought per kg shipped |
|---|---|---|---|
| Batch reaction | 0.2–3 kWh/kg | 2–20% | 1.02–1.25 kg |
| Electrolysis | 3–20 kWh/kg | 1–5% | 1.01–1.05 kg |
| Fermentation | 0.3–2 kWh/kg | 5–25% | 1.05–1.33 kg |
Surface treatment and coating
| Operation | Electricity | Scrap | Bought per kg shipped |
|---|---|---|---|
| Coating / painting | 0.1–1 kWh/kg | 5–35% | 1.05–1.54 kg |
| Conformal coating and potting | 0.1–0.8 kWh/kg | 1–6% | 1.01–1.06 kg |
| Glazing and decorating | 0.1–0.5 kWh/kg | 2–10% | 1.02–1.11 kg |
| Hot-dip galvanising | 0.5–2.5 kWh/kg | 1–5% | 1.01–1.05 kg |
| Plating / anodising | 0.3–3 kWh/kg | 2–10% | 1.02–1.11 kg |
| Powder coating | 0.4–2 kWh/kg | 2–10% | 1.02–1.11 kg |
| Printing and converting | 0.1–0.6 kWh/kg | 3–10% | 1.03–1.11 kg |
| Shot blasting and surface preparation | 0.05–0.4 kWh/kg | 0.5–3% | 1.01–1.03 kg |
| Textile wet processing | 1–6 kWh/kg | 2–10% | 1.02–1.11 kg |
Assembly and electronics
| Operation | Electricity | Scrap | Bought per kg shipped |
|---|---|---|---|
| Assembly and packing | 0.02–0.2 kWh/kg | 0.1–2% | 1.00–1.02 kg |
| Compressed air | 0.02–0.3 kWh/kg | 0.0–1% | 1.00–1.01 kg |
| PCB assembly (SMT line) | 0.5–3 kWh/kg | 0.5–3% | 1.01–1.03 kg |
Textile, leather and footwear
| Operation | Electricity | Scrap | Bought per kg shipped |
|---|---|---|---|
| Batch dyeing (exhaust) | 2.5–9 kWh/kg | 1–5% | 1.01–1.05 kg |
| Continuous dyeing (pad-batch, pad-steam) | 1.2–4 kWh/kg | 1–4% | 1.01–1.04 kg |
| Cut, make and trim | 0.3–1.2 kWh/kg | 10–25% | 1.11–1.33 kg |
| Footwear assembly | 0.5–2 kWh/kg | 5–18% | 1.05–1.22 kg |
| Knitting | 0.6–1.8 kWh/kg | 2–8% | 1.02–1.09 kg |
| Melt spinning (synthetic filament) | 0.9–1.6 kWh/kg | 1–4% | 1.01–1.04 kg |
| Nonwoven web forming | 0.8–3.2 kWh/kg | 2–8% | 1.02–1.09 kg |
| Open-end (rotor) spinning | 1.4–2.6 kWh/kg | 3–10% | 1.03–1.11 kg |
| Ring spinning | 2.4–4.6 kWh/kg | 4–12% | 1.04–1.14 kg |
| Scouring, bleaching and washing | 1.5–5.5 kWh/kg | 2–8% | 1.02–1.09 kg |
| Tanning and leather finishing | 1.5–6 kWh/kg | 15–40% | 1.18–1.67 kg |
| Textile printing | 1–4.5 kWh/kg | 2–8% | 1.02–1.09 kg |
| Weaving | 1.2–3.4 kWh/kg | 3–9% | 1.03–1.10 kg |
Biological and waste treatment
| Operation | Electricity | Scrap | Bought per kg shipped |
|---|---|---|---|
| Anaerobic digestion | 0.05–0.4 kWh/kg | 0.0–5% | 1.00–1.05 kg |
| Composting | 0.02–0.2 kWh/kg | 0.0–5% | 1.00–1.05 kg |
| Downstream recovery (broth to product) | 1.5–12 kWh/kg | 5–25% | 1.05–1.33 kg |
| Enzymatic conversion | 0.2–1.5 kWh/kg | 2–12% | 1.02–1.14 kg |
Use this
A process band on its own is not a footprint — it needs a material and a mass beside it. To put all three together, run a bill of materials through the free carbon calculator — no sign-up, and it runs in your browser. For the whole picture, including the process and its scrap, model the whole route in the prototype, or see what TrueGauge does for a manufacturer.
Early access
Request early access.
Both products are pre-launch. We're working with an early group of manufacturers, architects, builders and sustainability teams to shape what gets built first — tell us which platform is relevant to you.
Shape the roadmap
Tell us which decisions you need supported, and what the data has to do to be usable.
First access
Be first in line as each platform opens to early users.
A direct line to the team
Early conversations happen with the people building it, not a sales funnel.