Skip to content
PunarGen

Freeze drying (lyophilisation)

SUBLIMATION IS EXPENSIVE AND SLOW. Water must be frozen, then removed as vapour under vacuum without ever becoming liquid, which costs the latent heat of fusion AND of sublimation while the vacuum pump and condenser run for a day or more. It is roughly an order of magnitude above hot-air drying per kilogram of water removed, and is chosen only where heat would destroy the product.

What it costs

Electricity3–15 kWh/kg

Per kilogram PROCESSED, not per kilogram shipped — an operation early in a route also processes everything the later steps will throw away.

Scrap2–10%

Not normally recoverable in house, so the loss leaves as waste carrying its full upstream footprint.

Material bought per kg shipped1.02–1.11 kg

1/(1−scrap), not 1+scrap. The difference is small at low scrap and decisive at high: at 70% the right answer is 3.33 kg and the tempting one says 1.70.

Applied to

food_solid · chemical

Where the numbers come from

Screening band from published process-engineering literature and industry benchmarking for this operation. Modelled, not a source-read figure — replace it with your own metered consumption.

These bands are deliberately wide. A narrow band implies a precision screening data does not have, and a plant that meters itself and lands outside a narrow band will rightly stop believing the rest. Replace it with your own reading.

Use this

These are screening bands for freeze drying (lyophilisation) in general, not a reading from your line. To put a number on one of your own products, run its bill of materials through the free carbon calculator — no sign-up, and it runs in your browser. For the whole picture, including the process and its scrap, model the whole route in the prototype, or see what TrueGauge does for a manufacturer.

Early access

Request early access.

Both products are pre-launch. We're working with an early group of manufacturers, architects, builders and sustainability teams to shape what gets built first — tell us which platform is relevant to you.

  • Shape the roadmap

    Tell us which decisions you need supported, and what the data has to do to be usable.

  • First access

    Be first in line as each platform opens to early users.

  • A direct line to the team

    Early conversations happen with the people building it, not a sales funnel.

Register interest

Which platform? *

This registers interest in early access — both platforms are pre-launch, so this isn't a product signup or a purchase.