Skip to content
PunarGen

Resin transfer moulding and infusion

Cure time and cure temperature. A room-temperature infusion is nearly free in energy and slow; a heated tool trades energy for cycle time. The fibre and the resin dominate the footprint either way — carbon fibre is roughly twenty times glass fibre per kilogram.

What it costs

Electricity0.5–3 kWh/kg

Per kilogram PROCESSED, not per kilogram shipped — an operation early in a route also processes everything the later steps will throw away.

Scrap5–20%

Not normally recoverable in house, so the loss leaves as waste carrying its full upstream footprint.

Material bought per kg shipped1.05–1.25 kg

1/(1−scrap), not 1+scrap. The difference is small at low scrap and decisive at high: at 70% the right answer is 3.33 kg and the tempting one says 1.70.

Applied to

resin · textile

Where the numbers come from

Screening band from published process-engineering literature and industry benchmarking for this operation. Modelled, not a source-read figure — replace it with your own metered consumption.

These bands are deliberately wide. A narrow band implies a precision screening data does not have, and a plant that meters itself and lands outside a narrow band will rightly stop believing the rest. Replace it with your own reading.

Use this

These are screening bands for resin transfer moulding and infusion in general, not a reading from your line. To put a number on one of your own products, run its bill of materials through the free carbon calculator — no sign-up, and it runs in your browser. For the whole picture, including the process and its scrap, model the whole route in the prototype, or see what TrueGauge does for a manufacturer.

Early access

Request early access.

Both products are pre-launch. We're working with an early group of manufacturers, architects, builders and sustainability teams to shape what gets built first — tell us which platform is relevant to you.

  • Shape the roadmap

    Tell us which decisions you need supported, and what the data has to do to be usable.

  • First access

    Be first in line as each platform opens to early users.

  • A direct line to the team

    Early conversations happen with the people building it, not a sales funnel.

Register interest

Which platform? *

This registers interest in early access — both platforms are pre-launch, so this isn't a product signup or a purchase.