Skip to content
PunarGen

Injection moulding

Hydraulic machines sit at the top of the band; all-electric and well-tuned hot-runner tools sit near the bottom. Thin-wall and long cycle-time parts both push it up.

What it costs

Electricity0.6–2.5 kWh/kg

Per kilogram PROCESSED, not per kilogram shipped — an operation early in a route also processes everything the later steps will throw away.

Scrap2–8%

Normally recoverable as regrind in house. That reduces what must be bought; it does not reduce what the machines ran, and it never makes the loss free.

Material bought per kg shipped1.02–1.09 kg

1/(1−scrap), not 1+scrap. The difference is small at low scrap and decisive at high: at 70% the right answer is 3.33 kg and the tempting one says 1.70.

Applied to

hdpe · ldpe · pp · ps · pet · pa · pa66 · pc · abs · pmma · pvc · plastic · plastic_rigid

Where the numbers come from

Screening band from published polymer-processing benchmarking. Modelled, not a source-read figure — replace it with your own metered consumption.

These bands are deliberately wide. A narrow band implies a precision screening data does not have, and a plant that meters itself and lands outside a narrow band will rightly stop believing the rest. Replace it with your own reading.

Use this

These are screening bands for injection moulding in general, not a reading from your line. To put a number on one of your own products, run its bill of materials through the free carbon calculator — no sign-up, and it runs in your browser. For the whole picture, including the process and its scrap, model the whole route in the prototype, or see what TrueGauge does for a manufacturer.

Early access

Request early access.

Both products are pre-launch. We're working with an early group of manufacturers, architects, builders and sustainability teams to shape what gets built first — tell us which platform is relevant to you.

  • Shape the roadmap

    Tell us which decisions you need supported, and what the data has to do to be usable.

  • First access

    Be first in line as each platform opens to early users.

  • A direct line to the team

    Early conversations happen with the people building it, not a sales funnel.

Register interest

Which platform? *

This registers interest in early access — both platforms are pre-launch, so this isn't a product signup or a purchase.