Skip to content
PunarGen

Casting (route not stated)

Runners, risers and gates are returned to the furnace, so the yield looks poor while the material loss is small — but the melting energy is paid on all of it, every time.

What it costs

Electricity0.5–3 kWh/kg

Per kilogram PROCESSED, not per kilogram shipped — an operation early in a route also processes everything the later steps will throw away.

Scrap5–35%

Normally recoverable as regrind in house. That reduces what must be bought; it does not reduce what the machines ran, and it never makes the loss free.

Material bought per kg shipped1.05–1.54 kg

1/(1−scrap), not 1+scrap. The difference is small at low scrap and decisive at high: at 70% the right answer is 3.33 kg and the tempting one says 1.70.

Efficiency, fuel-fired30–60%

Of the fuel burned, the share that reaches the ware. The rest goes up the flue, which is why comparing a gas factor with a grid factor per kWh of FUEL answers the wrong question.

Efficiency, electric92–99%

Nearly everything reaches the ware because there is no flue — though the grid that generated it had losses of its own, upstream and counted separately.

Applied to

aluminium · zinc · steel · copper

Where the numbers come from

Computed from specific heat and latent heat of fusion for the alloy base.

These bands are deliberately wide. A narrow band implies a precision screening data does not have, and a plant that meters itself and lands outside a narrow band will rightly stop believing the rest. Replace it with your own reading.

Use this

These are screening bands for casting (route not stated) in general, not a reading from your line. To put a number on one of your own products, run its bill of materials through the free carbon calculator — no sign-up, and it runs in your browser. For the whole picture, including the process and its scrap, model the whole route in the prototype, or see what TrueGauge does for a manufacturer.

Early access

Request early access.

Both products are pre-launch. We're working with an early group of manufacturers, architects, builders and sustainability teams to shape what gets built first — tell us which platform is relevant to you.

  • Shape the roadmap

    Tell us which decisions you need supported, and what the data has to do to be usable.

  • First access

    Be first in line as each platform opens to early users.

  • A direct line to the team

    Early conversations happen with the people building it, not a sales funnel.

Register interest

Which platform? *

This registers interest in early access — both platforms are pre-launch, so this isn't a product signup or a purchase.