CarbonSpec / Capabilities
What it does, and what it does not
57 capabilities are available now and 66 are not. The absences are grouped by why, because that is the part a feature list hides: a tool missing a dozen integrations and a tool missing a dozen methods are different tools, and only two of the groups below are a boundary rather than a queue.
No absence below is described as planned or coming soon. Each states the condition that would change it — a licence, a customer on the other end of an integration, a structural model — because a condition is a fact somebody can go and establish, and a date is a promise this page has no standing to make.
Built (57)
Available now.
EN 15978 module scope statement
See itSay which modules a figure covers, above the figure rather than beneath it.
NRM elemental breakdown
See itReport carbon on the group and sub-element structure a cost plan already uses.
UK standards readiness
See itSay which UK carbon standards a Stage 2 figure is in scope for, without transcribing any limit or band.
Module A4 — transport to site
See itCompute delivery emissions from a route you state, as a band across the factor spread.
A5w, B4 and C1-C4
See itConstruction waste, replacement over the study period, and end of life.
Design-option and structural-scheme comparison
See itCompare schemes, with the ordering withheld unless it holds at every percentile.
Retrofit-versus-rebuild comparison check
See itTest whether a comparison is counted symmetrically enough to support its conclusion.
Reclaimed steel matching and certification route
See itMatch stock to members as a cutting problem, and set out what makes a section usable.
Substitutions, value engineering and the golden thread
See itOne record of what was specified, what was installed, who approved it and what it cost.
Brief, bill of quantities and specification intake
See itTurn a written brief, a pasted bill of quantities or a specification section into an assessable schedule, or into a list of the obligations a specification imposes.
EPD comparability gate and carbon per unit of performance
See itCheck two declarations against the known causes of divergence — product category rules, electricity mix, reference service life, functional equivalence — before comparing them, and express carbon per unit of performance.
Declared, range and conservative figures
See itThree numbers per product instead of one, where the conservative figure widens as the evidence gets vaguer — so ranking rewards the manufacturer who measured.
Open calculation ledger and reproducible run identifier
See itEvery figure traced to the arithmetic that produced it, recomputed and checked against what was reported — plus an identifier that changes when the reference data is revised, so a figure that will not reproduce announces itself.
Rubber recipes in phr
See itRead a mixing sheet in parts per hundred rubber, convert exactly to mass fractions and batch masses, and catch the incomplete recipe that still converts.
Published factor-matching accuracy
See itA measured accuracy benchmark for automated emission-factor matching, with wrong commits reported separately from refusals and the labelled set kept in source.
Energy by utility
See itSplit a product's process energy into direct electric, direct-fired heat, steam, compressed air and chilling, with the owner, the loss mechanism and the first check for each.
Physics check on metered energy
See itFlag a supplied kWh per kg that is below the physical floor for the process, or far outside its screening band, before it becomes the most trusted number in the model.
Plastic Packaging Tax effect of a change
See itPrice a packaging change in Plastic Packaging Tax as the per-component step function it is, with the threshold and rate entered from the Act.
PACT customer answer pack
See itA PACT v3 product-footprint draft from an assessment, with every mandatory field it cannot honestly fill left absent so the file only validates once it is true.
Implementation playbooks with trial plans
See itAn owner, steps, a measurement list, a stop criterion and a product-quality risk flag for each recommendation — including the scrap-rate ceiling past which a recycled-grade swap stops saving carbon.
Unit-operation process models
See it101 manufacturing processes modelled individually, with energy and scrap bands, and heat duties computed from first principles where the physics allows.
What to measure next, ranked by what it would narrow
See itRank every input by its share of the uncertainty band and show the band that measuring it would leave — the value of each measurement, not only its size.
GWP cap clauses for specifications
See itA maximum GWP per category, refused where the cap would name a shortlist of suppliers.
Public, versioned methodology
See itHow each product calculates, step by step, with every figure read from the code and a version that is a fingerprint of the reference data — plus what the results are not suitable for and where a language model is and is not used.
Public errata
See itEvery figure, coverage claim or description that was published and later found wrong, with how it was found and what changed.
State of the data
See itA measured report on how far the open factor libraries disagree, separating genuine disagreement from different products that share a name.
Fire before carbon on substitutions
See itCompare the class-typical reaction-to-fire of the specified and installed products on every recorded substitution, and hold a downgrade for a fire engineer's decision.
Open factor comparison library
See itThe same material's figure from every open library that prices it, side by side, with source rows, methods and licences.
Free tools without sign-up
See itA carbon calculator, a customer-questionnaire kit and a regulatory scanner that run in the browser with nothing to register for.
Questions instead of forms
See itTurn a bill of materials into a short list of plain questions, ranked by how much each answer would move the result, rather than a form to complete.
Labelled figures before an EPD
See itLet a manufacturer produce an indicative, tier-labelled footprint and a PACT draft before paying for a verified declaration.
Why a product ranks where it does
See itEvery score carries its rationale: the figure, the bounds it was placed between and the class-typical values used where a product's own were not recorded.
Capex, payback and a sequenced plan
See itTurn recommendations into a plan: the client's capital cost gives payback, an annual budget spreads the actions over years in dependency order, and the cost of waiting is stated from priced savings only. Two changes to one part are treated as alternatives, never summed.
Machine energy fingerprints, with idle and changeover split out
See itCompare each machine's metered kWh per kg with the best in its group, and split the meter into productive, idle and changeover energy from the client's own readings.
Allocation alternatives side by side
See itShow a co-product's footprint by mass, by value and by system expansion together, with the spread the choice alone creates.
Shareable result that recomputes itself
See itA link carrying the inputs rather than the result, recomputed in the recipient's browser and flagged if the reference data has changed since it was made. Nothing is uploaded.
The result in plant units
See itShow conversion energy in kWh and material bought but not shipped in kilograms, per product and per year, beside the carbon figure.
Uncertainty split by source
See itSplit the band into materials data, the process model and assumed circumstances, with what would narrow the largest part.
Qualified wording for publishing a figure
See itDraft the statement a client can publish with its boundary, method, range and verification status attached, refuse generic and neutrality claims, and refuse a reduction claim the uncertainty cannot see.
A tested grid intensity on electrified steps
See itRe-price the electrified steps at a grid intensity the user enters from their chosen projection, and show how much of the conversion carbon a cleaner grid can reach at all.
A questionnaire read as an action plan
See itList what a customer's questionnaire expects the company to have, ranked by how many questions each item unblocks.
Declarations past their validity flagged
See itCheck whether a declaration is still within its stated validity before it is compared, and state the reference year of each factor library beside a result.
A gap reads as a gap in both products
See itRefuse to print a total built from a minority of a product's mass, and show a missing rating as class-typical rather than as a low score.
Checks on a supplier's declared figure
See itRead a pasted supplier declaration and check its boundary, method and unit before it replaces a library figure.
Starting points for moulders, extruders and compounders
See itStart an assessment from a template for the kind of plant, with its process chain already chosen, or from a blank spreadsheet template.
Climate Change Agreement target tracker
See itShow how far a site is from its CCA target and what a shortfall would cost in buy-out, with the target and price entered from the agreement.
Board, funder and lender briefs
See itGenerate a board one-pager, a project brief for a funding or budget application, and a lender evidence pack from the same assessment, with anything unpriced written as missing.
Customer requests read for deadline and format
See itRead a pasted customer request for its deadline and the formats it names, and draft a holding reply that commits to no figure.
Energy per kg, scrap cost and air-leak calculators
See itFree tools that price a plant's own figures: kWh per kg against the usual range, the true cost of scrap, and compressed-air leaks from the choked-flow equation.
A sample report before sign-up
See itA real output from the pipeline on a template product, regenerated whenever the pipeline changes.
Security and data handling, stated publicly
See itWhich tools never send data anywhere, where form submissions are stored, who hosts what, and which policies are not yet written.
Energy per customer order
See itGive each customer order its own machine energy: its kilograms at the machine's productive intensity plus the changeovers it caused, with idle time reported rather than spread.
One first saving on every result
See itLift the single action to take first to the top of a result — in pounds where prices exist, never a change of electricity contract.
A three-question start
See itStart from the kind of plant, the annual volume and the tariff, so a first session ends in pounds rather than a blank form.
A carbon section for customer tenders
See itWrite a tender's carbon answer from the assessment alone, with planned actions listed as planned and a gap left for completed measures.
Switch-to-recycled calculator
See itPrice moving a part to a recycled grade in carbon and money, with the scrap rise at which the saving is exhausted.
Machine retrofit business case
See itJudge a quoted retrofit against the machine's own productive energy, with payback at the plant's tariff.
Needs data we do not licence (13)
The underlying data is published under a licence that does not permit redistribution, or sits behind a subscription. Scraping it would be both a licence breach and a maintenance problem, since a scraped copy goes stale silently.
Chemistry-aware material matching
Match materials by CAS number, polymer family, filler and grade rather than by name, so that a specific polymer outranks the generic category it belongs to.
What would change it: A material taxonomy linking grades to families to generic categories. The published accuracy benchmark found exactly this gap: "virgin LDPE shrink film" is declined as a family ambiguity because nothing here knows LDPE is a kind of plastic film.
Filler, plasticiser and curative swaps with property notes
Show the carbon and the likely property effect of changing a rubber compound's filler, plasticiser or cure system.
What would change it: Emission factors for rubber compounding ingredients — the same gap recorded against the phr reader. Property notes without the carbon half would be a materials tool, not this one.
Validation against published assessments
Run published LCAs or EPDs through the engine and publish the error statistics.
What would change it: Published assessments whose full inventories are available to re-run. A headline figure without its inventory cannot be reproduced, so a comparison against it would measure the difference in assumptions rather than the engine.
Emission factors for rubber compounding ingredients
Price carbon black, zinc oxide, accelerators, process oils and the elastomers themselves, so a rubber compound produces a footprint rather than a shopping list.
What would change it: Published declarations for rubber chemicals, which the open datasets this product draws on do not carry. The recipe reader already converts and validates the formulation and names each missing figure by its share of compound mass — the arithmetic is waiting on the data, not the other way round.
UK-first benchmark distributions
Benchmark construction products against UK declarations, on the UK grid, by default.
What would change it: UK declaration data in a form that can be aggregated. The current distributions are German declarations and are labelled as such wherever they appear.
Health Product Declaration search
Ingredient disclosures alongside EPDs, with chemical-exclusion filters.
What would change it: A licence for the HPD repository, or a publisher willing to syndicate.
Declare label data
Red List Free status and ingredient lists for specified products.
What would change it: A data agreement with the label's operator.
Indoor-air emission certificate filters
Filter by low-VOC certification for indoor air quality.
What would change it: Access to the certification schemes' own registers.
Merchant prices and tender price indices
UK material price levels with history and forecasts, and regional cost adjustment.
What would change it: A subscription to a published cost dataset. Note the change log already accepts your own cost figures and ranks changes by cost per tonne avoided — what is missing is a price source, not the arithmetic.
Manufacturer product catalogue, technical filters and document hub
Search products by compressive strength or lambda value, browse by Uniclass, download literature and BIM objects, and export results to CSV.
What would change it: A product catalogue. This product holds material CLASSES and published EPD distributions, not manufacturers' product records, and a catalogue is a data business rather than a feature.
Civil and specialist-engineering material library
Generic data for civils materials beyond building products.
What would change it: A published civils dataset under a licence permitting redistribution.
CIBSE TM65 embodied carbon for building services
Estimate MEP equipment carbon where no EPD exists.
What would change it: TM65 itself, which is a published method with its own factors. Implementing it means reproducing those factors, and they are not ours to redistribute.
Client-mandated periodic carbon reporting templates
Produce monthly or quarterly carbon returns in the format a particular client requires, such as a major infrastructure owner's own tool.
What would change it: The client's template, which is theirs and differs per organisation. The underlying figures are already produced; what is missing is somebody's specific return format, and guessing at one produces a document that is rejected on formatting rather than on content.
Needs an integration (11)
Needs a live connection into software this product does not run — a modelling tool, a construction platform, a telematics feed. Each is a real piece of work rather than a refusal, and each is worth doing only once somebody is actually using both ends.
Inventory export to openLCA or ILCD
Export a model in an open LCA format so a customer can take it to any tool or reviewer.
What would change it: A customer who needs a model in a named tool. Each line has to be mapped to that tool's reference flows, and a mapping nobody has imported and checked is a file that opens and means something different.
Price and supply watchlists per project
Alert a project team when the price series behind its specified materials moves.
What would change it: A notification channel and projects with specified materials to watch. The producer price series are already read; the alerting is the missing half.
Importing Climate Change Agreement reporting data
Read a site's CCA energy returns directly instead of retyping them.
What would change it: A copy of the reporting format a sector association actually uses, checked against a real return. Guessing a format would import numbers into the wrong fields silently.
A monthly plant digest by email
Email the owner a monthly summary of energy, scrap, carbon and the top action, with no login needed.
What would change it: An email service and customers with accounts whose data changes month to month.
Meter readings from a phone photo
Log a meter reading by photographing it on the shop floor.
What would change it: A reading service accurate enough on real meters, tested on photographs from real plants, with every reading shown back for confirmation.
Data collected by email, one question a day
Ask an owner one question a day by email and feed the answers into the model.
What would change it: An email service with inbound parsing, and customers with accounts to attach answers to.
Revit, Rhino and Grasshopper plug-ins
Carbon feedback inside the modelling tool, and quantities pulled from the model.
What would change it: A team using both ends. Until then it is a plug-in with no model behind it.
Procore, Autodesk Construction Cloud and Bentley iTwin
Carbon data flowing into construction-management and digital-twin platforms.
What would change it: A customer on one of them, and their API credentials.
cove.tool and operational-energy tool links
Join embodied and operational figures in one model.
What would change it: An energy model to join to — see the note on operational energy below.
Plant telematics and embedded concrete sensors
Pull machine fuel and hours, and maturity readings, automatically from site.
What would change it: A site with the hardware, and a contractor willing to share the feed.
3D carbon heat map
Colour a model by embodied carbon to show hotspots visually.
What would change it: A model. The element and NRM breakdowns already carry the data a map would draw.
Needs a user base we do not have (13)
Depends on an audience the product does not yet have. A review system with no reviewers, or lead generation with no specifiers, is worse than absent: it demonstrates emptiness.
Independently labelled accuracy benchmark
The same measurement against a label set written by practitioners with no stake in the matcher, rather than by its authors.
What would change it: Practitioners willing to label a set. The measurement, the set and its provenance are already published — what is missing is somebody else's judgement about what counts as a correct match, which is the part the authors cannot supply about their own work.
Predicted against measured savings
Record what each implemented change was predicted to save and what it measured, and use the difference to improve future predictions.
What would change it: Implemented changes with measured results. The trial plans already name what to measure; the comparison needs somebody to have run one.
Learning from each customer's corrections
Make every correction a customer makes to a match improve their future matches.
What would change it: Customers making corrections. The matcher is deterministic by design, so learning would be an explicit, reviewable synonym list per customer rather than a drifting model.
Manufacturer right of reply
Let a manufacturer add context to their product's data without changing its score.
What would change it: Manufacturers whose products are being compared here, and a process for checking who is replying.
Supplier improvements visible to buyers
Show a buyer a supplier's verified improvements as they happen, with the supplier's consent, instead of at the next declaration.
What would change it: Suppliers and buyers on the same platform, and a consent model both have agreed.
Anonymised benchmarks from real plants
Process benchmarks built from users' own metered data, which no published source carries.
What would change it: Enough plants per process for an anonymised figure not to identify one of them, and their consent.
Multi-client workspaces for consultants
One login for an adviser to manage many client assessments.
What would change it: Consultants using the product for more than one client, and the signed-in application's accounts extended to hold more than one organisation.
A published energy-per-kg benchmark for UK moulders
An annual report on what UK moulding plants actually draw per kilogram.
What would change it: Metered data from enough plants, shared with consent. The process library's bands are literature ranges; publishing them as a UK benchmark would present a model as a survey.
Specifier product reviews
Ratings and comments on products from other specifiers.
What would change it: Specifiers. A review system with no reviews demonstrates emptiness.
Manufacturer lead generation, advertising and listing analytics
Pass enquiries to manufacturers, sell placements, and report views and downloads.
What would change it: Traffic, and a decision to be an advertising business. That is a different company from the one that refuses to rank products it cannot evidence.
CPD events and webinars
Continuing-professional-development content for specifiers.
What would change it: An audience, and somebody to accredit it.
Construction project leads
Show which projects are planned or on site so suppliers can target them.
What would change it: A projects database, which is a licensed-data business of its own.
Shared multidisciplinary dashboards and direct messaging
One cloud dashboard the whole design team edits, and messaging to manufacturers.
What would change it: More than one user per project, which the product does not yet have.
Would mean inventing a figure (18)
The arithmetic is available and the inputs are not. Producing the feature would mean supplying a default — a wastage rate, a service life, a structural utilisation — that nobody owns, and a figure with no owner is the one that reaches a submission unchallenged.
Cure dwell time in the oven model
Model how long a part sits at temperature, not only the temperature rise, since holding losses scale with dwell time.
What would change it: An oven's loss rate at temperature, which is a property of the oven. The temperature rise and heat recovery are already computed from first principles; a generic holding loss applied to every oven would be the one term with no source.
Probability bands on recommendations
Report a swap as "saves 12-30% with ~85% probability" rather than as a point estimate, so the confidence in a recommendation travels with it.
What would change it: A defensible model of the uncertainty that actually dominates, which is not the one available. Propagating the factor dispersion was measured: for a virgin-to-recycled HDPE swap it gives "saves 28% to 58%" against a point of 43%. That band is too wide for the factors, which are published conversion values read directly rather than estimates, and it is silent on what actually decides the answer — how much of the material can be substituted before the grade stops being drop-in. A band that is precise about the wrong quantity is worse than the point estimate it replaces. The recommendations already carry cost, effort, lead time, the commercial direction and the process consequence, which is the part that can be said.
Electricity-mix harmonisation between declarations
Re-express two EPDs on a common electricity mix so the comparison is of products rather than of grids.
What would change it: A national grid-intensity table, and the intensity each declaration assumed. The comparability gate names the difference and its direction; harmonising it from an assumed factor would produce a figure that looks settled when it is not.
Customer-specific methodology profiles
Apply a customer's required rulebook — a PEF category rule, the Together for Sustainability guideline — to the same model automatically.
What would change it: The rulebook encoded against a worked case it can be checked on. Applied without one, a profile would produce a figure labelled as conforming to rules nobody has verified it follows.
Ex-ante estimates for pilot-scale processes
Estimate a new process's footprint at commercial scale from pilot data, for products and construction materials that have no declaration yet.
What would change it: Scale-up factors for the technology in question, from its own developers or literature. A generic factor applied to every process would be the one term in the estimate with no source.
One footprint flowing from maker to specifier
Let a supplier's TrueGauge footprint enter a specifier's CarbonSpec comparison directly.
What would change it: A shared method both ends accept. A screening footprint beside verified declarations would be two methods in one ranking, which is the comparison the EPD gate exists to stop. What crosses between the products today is physics — processing windows, cure times — not factors.
Compliance-gap closure beyond packaging tax
Show how far each action closes a gap against packaging, border-carbon or recycled-content rules.
What would change it: A named person maintaining each rule's values against the legislation. The packaging-tax step is built with the threshold entered by the user for this reason; transcribing the others would put unowned numbers in front of a compliance decision.
Grant matching per recommendation
Tag each recommendation with the grants it may qualify for.
What would change it: A named person maintaining the schemes, their eligibility and their deadlines. Programmes open and close within a year; a list nobody maintains would send a client to a closed scheme with confidence.
Electricity supply and on-site solar options
Compare standard tariffs, green tariffs, power purchase agreements and rooftop solar on cost and carbon.
What would change it: The client's own quotes. Tariff and PPA prices change weekly and depend on the site's load profile, so any default would be the number the comparison turned on.
What customers will ask next, by sector
Show the carbon and sustainability asks coming from each customer sector, from published supplier codes.
What would change it: A named person reading and maintaining the supplier codes. A radar of asks nobody has checked this quarter would tell a supplier to prepare for the wrong thing.
A planning-ready whole-life carbon statement
Export a CarbonSpec assessment in the format a planning authority asks for.
What would change it: The authority's current template, read from the source and maintained by a named person. A statement laid out to a remembered template would fail the first time the template changed.
Grid and span optimisation for carbon
Test column grids and spans for the lowest structural carbon.
What would change it: A structural model. Carbon follows from member sizes, member sizes follow from a design check, and this product does no design checks — an optimiser without one would be choosing grids on a correlation.
Over-design detection for concrete strength class
Flag specified strength classes above what the design needs.
What would change it: The structural design. What the element needs is the output of a check this product does not run, and flagging a grade as excessive without one is a guess with an engineer's liability attached.
Weather-aware strength gain and formwork striking
Predict concrete strength gain from forecast temperatures and strike formwork sooner.
What would change it: Site sensors and a mix-specific maturity model. A prediction from published curves would be a programme decision made on a generic curve.
Insulation embodied-versus-operational payback
Find the thickness where extra embodied carbon stops paying back.
What would change it: An operational energy figure, which is module B6 and belongs to the energy assessment. The embodied half is already computed; the payback needs the other half from somebody who modelled it.
Ready-mix plant-specific EPD selection
Use the actual supplying plant's EPD rather than a category average.
What would change it: A chosen supplier. At Stage 2 there is not one — and the product already accepts a supplier's own figure wherever you hold it, which is the same thing done honestly.
Forest-practice and sourcing-region effects for timber
Show how forest management and origin change timber's impact.
What would change it: Region-specific forestry data. The biogenic accounting rule and the end-of-life routes are already handled, which is where the large differences actually sit.
Carbon estimate from a plain-language brief alone
Produce an embodied-carbon figure from a written brief, filling every element the brief does not mention.
What would change it: Nothing that should change. Filling the unmentioned elements means multiplying floor area by a published material intensity averaged over other people's buildings — a confident number for a building nobody has designed, arriving early enough to reach the bid. The intake page reads what a brief STATES and lists what it does not, which is the same job done honestly.
Another discipline's work (4)
Belongs to an energy assessment, a structural design or a fire engineer. Producing it here would imply this product had modelled something it has not.
Critical-review package for public comparisons
Assemble everything an ISO 14044 review panel needs for a comparative assertion disclosed to the public.
What would change it: A full ISO-conformant study. A panel reviews a study; a screening comparison packaged for one would ask a panel to review something that is not the thing they review.
Operational energy (module B6)
The energy the building consumes in use.
What would change it: Nothing this product should do. It is an energy model's output, and combining it with a material assessment here would imply the building's services, fabric and occupancy had been modelled.
Refrigerant GWP limit check
Check chosen refrigerants against a standard's global-warming-potential limit.
What would change it: Nothing this product should do. A refrigerant charge is a building-services selection governed by the F-gas regime, not a material in a schedule — and the limit itself is one of the published values this codebase declines to transcribe, for the reasons set out on the standards register.
Daylight, comfort and acoustic co-benefits
Suggest non-carbon improvements alongside carbon ones.
What would change it: Nothing this product should do. Each is a modelled discipline, and a suggestion produced without the model is advice with no analysis behind it.
A decision for the company (7)
Not a feature anybody can write. Pricing, hosting, partnerships and what to open-source are commitments the company makes and then has to keep, and listing them as capabilities would let a line of code stand in for a promise nobody has made.
Flat pricing with no database surcharge
One price, with no extra fee for licensed data.
What would change it: A pricing decision. The product uses only open data today, so there is no surcharge to pass on, but a price is a commitment the company has not published.
An expert review hour with each assessment
A human check of each assessment, bundled at an SME price.
What would change it: A decision to staff and price it.
Specifier-paid rankings
Rankings paid for by the people using them, with no manufacturer paying for placement.
What would change it: A business-model decision. Nothing ranks by payment today, and nothing is sold to manufacturers, but that is a present fact and not yet a published commitment.
Independent academic review of the method
A university group reviewing the methodology and publishing its view.
What would change it: An agreement with a research group. The methodology they would review is published.
Open-source calculation engine
Publish the calculation code so anyone can inspect the arithmetic.
What would change it: A licensing decision by the company. The methodology and the self-checking ledger make the arithmetic inspectable in the meantime, which is not the same as the code being open.
UK hosting and data sovereignty
Host customer data in the UK, owned by the customer and exportable at any time.
What would change it: A hosting decision. Where each service runs is an infrastructure fact to be stated once it is chosen for that reason, not a claim to make in advance.
Funnel and in-product usage events
Track first result, report downloaded and share link made, not only page views.
What would change it: A choice of analytics plan. Page views are measured already; custom events need a paid plan or another tool.
Why publish this
A feature-comparison grid rewards the thin implementation. Anything can be a tick if nobody asks what happens when the data is missing — and in this field the answer is usually that a default appears, looks like a measurement, and ends up in a planning submission.
Two of the groups above are a boundary rather than a queue. Operational energy belongs to an energy assessment, and anything needing a structural design check belongs to an engineer. Those will not be built here however many customers ask, because building them would mean claiming to have modelled something we have not.