TrueGauge / Rubber recipe
Your recipe, in phr
A rubber compound is specified in parts per hundred rubber: the elastomers total 100 by definition and everything else is stated relative to them. That is how the recipe exists — on the mixing sheet, in the spec, in your head. No carbon tool takes it, so the first thing anybody asks you to do is convert it by hand.
The conversion is exact, which is unusual for anything in this product. What is worth your attention is the completeness check: an incomplete recipe still converts, and every ingredient you did enter quietly gains share because the denominator shrank.
Your mixing sheet
One ingredient per line, quantity last. Elastomers are detected from the name and shown in the table — this product knows the common designations and not your in-house ones.
Recipe read
7 ingredients totalling 171 parts. The conversion to mass fractions is exact — phr is a complete statement of proportions, so each part divided by the total is the mass fraction with nothing assumed and nothing to argue about, and a 500 kg batch divides the same way. The elastomers total 100 parts, so the recipe reads as complete.
As mass fractions
| Ingredient | phr | % of compound | kg in batch |
|---|---|---|---|
| NRelastomer | 100 | 58.48 | 292.40 |
| N330 carbon black | 50 | 29.24 | 146.20 |
| Aromatic oil | 10 | 5.85 | 29.24 |
| Zinc oxide | 5 | 2.92 | 14.62 |
| Sulfur | 2.5 | 1.46 | 7.31 |
| Stearic acid | 2 | 1.17 | 5.85 |
| CBS | 1.5 | 0.88 | 4.39 |
| Total | 171 | 100.00 | 500.00 |
What a footprint would need next
0% of the compound's mass carries a figure. The rest is listed largest first, because that is the order worth chasing your suppliers in — counting ingredients instead of mass would put a 1.5 phr accelerator level with a 50 phr filler.
- NR58.5% of compound
- N330 carbon black29.2% of compound
- Aromatic oil5.8% of compound
- Zinc oxide2.9% of compound
- Sulfur1.5% of compound
- Stearic acid1.2% of compound
- CBS0.9% of compound
No emission factor for a rubber ingredient is held here, and none is invented. This library recognises the elastomers and leaves them to your supplier’s figure — so the list above is what to ask for, in the order worth asking.
The error this is really for
Leave out the 10 phr oil and nothing looks wrong. The remaining ingredients still sum to 100%, every figure is plausible, and a 50 phr black moves from 29.2% to 31.1% of the compound. The footprint that follows is overstated on every line you did enter, and there is no symptom at all.
The elastomer sum is the one completeness check that can actually be made from the recipe itself. If the polymers do not total 100, either the sheet is not in phr or a polymer is missing — and both are worth stopping for.