When cutting carbon makes something else worse
A swap that cuts carbon by a fifth may raise acidification, water use or particulates. Of 2,286 factors here, 2,229 can answer only one question — so for most substitutions the honest verdict is "unverified", which is not the same sentence as "no shift found".
6 min read · last checked
A tool tells you switching to 30% recycled content cuts your carbon by a fifth. It is right. What it has not told you — because it did not look — is whether the same swap raises acidification, water use or particulate formation.
Moving an impact from one category to another and reporting the half that improved is called burden shifting. It is the failure ISO 14040/14044 spends the most words on: §4.1.4 asks for comprehensiveness across categories precisely because of it, and §4.4.5 requires interpretation to go looking for it.
It is not hypothetical
The classic case is a boiler moving from gas to biomass: global warming falls sharply and particulate formation and acidification rise. Secondary metal routes trade blast-furnace CO₂ for electricity, which moves the answer wherever the grid is dirty. Recycled aluminium is roughly a twentieth of primary on carbon and is not a twentieth of it on everything.
None of those are reasons not to do the thing. They are reasons to know you are doing it.
The reason most tools cannot check
Measured on this library, which is eight normalised public datasets:
| Count | ||
|---|---|---|
| 2,286 | factors in the library | |
| 2,229 | carry a single indicator | carbon, and nothing else |
| 57 | carry more than one | 2.5% |
40 impact categories across 8 methods are computable. Almost nothing can answer more than one of them.
For most substitutions the honest answer is not “no shift” and not “shift”. It is “this cannot be checked with the data that exists” — and a tool has to be able to say that, because silence reads as safety.
Four verdicts, and the distinction that matters is between two of them
| Verdict | Means |
|---|---|
| no shift possible | Safe by construction. No data consulted, and none can contradict it. |
| no shift found | Checked against both vectors, came back clean. |
| shift detected | A category gets worse. Named, with the magnitude. |
| unverified | Could not be checked at all. |
“No shift found” and “unverified” are not the same sentence, and to anyone skimming a result they look identical. Nothing was found because nothing was looked at. With 2,229 single-indicator factors, unverified is the common case, so conflating the two would mean most recommendations quietly claiming a clean bill of health they never earned.
One class of action cannot shift burden, and it can be proved
Worth separating out, because it is the good news. Some levers change how much of a material is used and not which material it is — cutting scrap, lightweighting, using less of the same electricity. Every indicator then scales by the same factor. Use 10% less of exactly the same material and every category falls by 10%; none can rise.
That is safe by construction rather than by evidence — no data is consulted and none could contradict it. Which makes yield improvement the one carbon lever nobody ever has to caveat, and is a decent argument for reaching for it first.
Substitutions are the opposite: a different material, a different energy carrier, and the indicators move independently. Anything that changes what is used has to be checked, and where it cannot be, that has to be said.
What finding a shift does not mean
It does not mean don’t. Trading eutrophication for carbon may well be the right trade — but weighting one impact category against another is a judgement ISO 14044 §4.4.5 keeps with the reader rather than inside the analysis, especially where the result is comparative and public.
So the useful output names what moves and in which direction, and stops. The one thing it must not do is stay quiet — which is exactly what a carbon-only tool does by default, and why multi-indicator breadth matters more than another thousand carbon rows.
Check it yourself
Every figure above is on this site with its source, geography, method and licence.
Also worth knowing
- Why two published carbon factors for the same material disagree
- A 70% scrap rate does not cost you 70% more material
- The energy factor you quoted is missing about a third of itself
- Your renewable tariff is zero and 0.131 at the same time
- The published factors say gas is 15% worse. Delivered as heat it is 2–3.5×.
- The same steel is 1.99 and 1.14 kg CO₂e, and both are correct
- Some of a kiln's CO₂ comes out of the rock, not the flame
Use this
These are the mistakes the assessment engine is built to avoid making. To watch it not make them on a product of your own, run a bill of materials through the free carbon calculator — no sign-up, and it runs in your browser. For the whole picture, including the process and its scrap, model the whole route in the prototype, or see what TrueGauge does for a manufacturer.
Early access
Request early access.
Both products are pre-launch. We're working with an early group of manufacturers, architects, builders and sustainability teams to shape what gets built first — tell us which platform is relevant to you.
Shape the roadmap
Tell us which decisions you need supported, and what the data has to do to be usable.
First access
Be first in line as each platform opens to early users.
A direct line to the team
Early conversations happen with the people building it, not a sales funnel.