Your renewable tariff is zero and 0.131 at the same time
A REGO-backed tariff reports as 0 under market-based accounting and 0.131 kg CO₂e/kWh under location-based. Both figures are correct. The gap between them is the entire substance of a renewable electricity claim.
4 min read · last checked
Switch to a REGO-backed renewable tariff and your reported electricity emissions can go to zero overnight. Nothing about the electricity arriving at your site changes. Both of those statements are true, and the GHG Protocol requires you to report both numbers for exactly that reason.
| kg CO₂e/kWh | Basis | What it is answering |
|---|---|---|
| 0 | Market-based | What have you contracted for? |
| 0.13096 | Location-based | What is physically on the wire where you are? |
Same tariff, same site, same hour. Two questions.
Market-based is an accounting convention, not a physical claim. The electrons are the same electrons. What a certificate changes is who has the right to claim them — which is a real thing, and a different thing from what came down the cable.
Why this is a trap rather than a technicality
Report market-based alone and a plant can appear to have decarbonised its electricity without changing its physical draw by a single kilowatt-hour. That is not fraud; it is the convention working as designed. It becomes a problem in three places:
A buyer with their own methodology. Large customers increasingly ask suppliers for location-based figures precisely so that contractual claims do not propagate up their supply chain. If you only hold the market-based number, you cannot answer.
A comparison across years. A market-based series that drops to zero the year a tariff was signed tells you when the contract started, not whether anything improved. The location-based series is the one that shows physical change.
A decision about equipment. If electricity reports as free, every electrification project looks free and every efficiency project looks worthless. That is the wrong signal to give an engineer choosing between a gas oven and an electric one.
On-site solar is not zero either
The intuitive answer for a roof full of panels is zero, and it is wrong for a different reason. The panels have an embodied footprint — silicon, glass, aluminium, shipping — amortised over everything they will ever generate. This library carries on-site generation at 0.041kg CO₂e/kWh rather than nothing, and flags it as a screening figure worth replacing with the installer’s own.
It is still roughly a third of the grid, which is the point. A real reduction reported honestly is more useful than a zero that invites the first person who checks to disbelieve everything around it.
What to hold
Both numbers, always, and label them. This site keeps the market and location figures as two separate carriers rather than one, because the gap between them is the substance of the claim and collapsing it into a single number is how the claim stops being checkable — the same discipline that keeps well-to-tank separate from combustion and stops eight published libraries being averaged into one.
Check it yourself
Every figure above is on this site with its source, geography, method and licence.
Also worth knowing
- Why two published carbon factors for the same material disagree
- A 70% scrap rate does not cost you 70% more material
- The energy factor you quoted is missing about a third of itself
- The published factors say gas is 15% worse. Delivered as heat it is 2–3.5×.
- The same steel is 1.99 and 1.14 kg CO₂e, and both are correct
- Some of a kiln's CO₂ comes out of the rock, not the flame
- When cutting carbon makes something else worse
Use this
These are the mistakes the assessment engine is built to avoid making. To watch it not make them on a product of your own, run a bill of materials through the free carbon calculator — no sign-up, and it runs in your browser. For the whole picture, including the process and its scrap, model the whole route in the prototype, or see what TrueGauge does for a manufacturer.
Early access
Request early access.
Both products are pre-launch. We're working with an early group of manufacturers, architects, builders and sustainability teams to shape what gets built first — tell us which platform is relevant to you.
Shape the roadmap
Tell us which decisions you need supported, and what the data has to do to be usable.
First access
Be first in line as each platform opens to early users.
A direct line to the team
Early conversations happen with the people building it, not a sales funnel.