Tell it what you make.
It tells you what it costs you — in carbon and in pounds.
TrueGauge turns a sentence about a product into a defensible footprint, finds where the carbon and the money actually sit, and tells you which instruments reach you. Below are two real products taken end to end. Every number was computed by the engine when this page loaded.
A sentence, or a spreadsheet. Type “28 g HDPE body, 3 g PP closure” and the bill of materials is read out of it — you do not need a BOM to start.
Questions ranked by how far your answer could move the number, with the swing shown. Forty identical ambiguities become one question.
Every question has an “I don’t have this” door. Take it and a named assumption is substituted and printed in the report, not hidden in the total.
Not just the shopping list. Conversion energy, scrap, regrind, utilities and on-site generation — the parts a converter can actually change.
Every saving in carbon and in money. The number that gets a change approved is rarely the one in kilograms.
A scan that runs on sector and material together as you type, and reports on the result — what reaches you, what it requires, and where your figures sit. Folded shut until you open it, because forty provisions above a half-written description is a wall to scroll past, not a finding.
Ranked by how much of the uncertainty band each input owns, which is not the same as how big the line is — the biggest line is usually already traced, and measuring it again buys nothing. Each row carries the band it would leave behind, so “±6% becomes ±4%” is checkable rather than an adjective.
Disposal is reported alongside the footprint and never inside it, because a cradle-to-gate figure and a cradle-to-grave one are not comparable. Landfilling a tonne of board emits about 1,165 kg CO₂e against a tonne of HDPE’s 9 — cellulose decomposes anaerobically and gives off methane, and every intuition that paper is the gentler choice reverses at disposal.
What it covers
Organised by trade rather than by our own filing. Open any sector to read the actual list — every name is pulled from the arrays the engine runs on, so this page cannot claim something the product does not have. Each one also says what it does not reach, because finding that out here is better than finding it out an hour in.
A process serves more than one trade — coating appears under packaging and under adhesives, compression moulding under plastics and under rubber — so these counts deliberately do not add up to the library total below.
Plastics and polymer conversion
Injection, blow, rotational and compression moulding, film and profile extrusion, thermoforming, calendering, foaming, compounding — with the polymer rheology and thermal properties that decide cycle time.
Cooling time is computed from the polymer's own thermal diffusivity and wall thickness rather than read off a table, and drying energy from its equilibrium moisture, so a thin-wall part and a thick one do not receive the same answer.
Not covered. Engineering polymers such as PEEK and POM are recognised and priced only from your own supplier figure.
14 processes · 14 materialsSee what is in it
Processes
- Injection moulding
- Film extrusion (blown or cast)
- Profile or sheet extrusion
- Injection stretch blow moulding (bottles)
- Extrusion blow moulding
- Thermoforming
- Compression moulding
- Rotational moulding
- Calendering
- Foaming / expansion
- Compounding / masterbatch
- Melting / compounding
- Drying (hot air or oven)
- Resin pre-drying (desiccant)
Polymers density, melt and mould temperatures, specific heat and thermal diffusivity
- HDPE
- Polypropylene
- PET
- Polystyrene
- ABS
- Polycarbonate
- PVC
- Nylon / polyamide
- Acrylic (PMMA)
- Acetal (POM)
- PLA
- PHA / PHB
- Bio-based polyethylene
- LDPE
Packaging — rigid, flexible, paper and board
Papermaking, pulping, corrugating and case making, printing and converting, coating — plus the barrier structures, freight and end-of-life that packaging decisions actually turn on.
Flutes carry their real take-up factor, so board area is derived from the profile rather than assumed flat, and a laminate is assessed for recyclability structure by structure instead of being averaged into one number.
Not covered. Barrier laminates are described and assessed for recyclability; they are not priced as a single factor.
6 processes · 20 materialsSee what is in it
Processes
- Papermaking
- Pulping / refining
- Corrugating and case making
- Printing and converting
- Coating / painting
- Thermoforming
Paper and board grades grammage range, recycled content and typical use
- Kraftliner
- Testliner
- Semi-chemical fluting
- Recycled fluting (wellenstoff)
- Folding boxboard (FBB)
- Solid bleached board (SBS)
- White lined chipboard (WLC)
- Greaseproof / glassine
- Newsprint
Corrugated flute profiles take-up factor and board calliper
- A flute
- C flute
- B flute
- E flute
- F flute
- N flute
Barrier laminate structures layer build-up and whether the structure can be recycled as one material
- PET / PE laminate
- PET / aluminium foil / PE
- PE / EVOH / PE
- Mono-material PE with coating
- Metallised PET
Food and beverage manufacture
Thermal processing and retort, baking and roasting, freezing and cold store, freeze drying, homogenising, extrusion cooking, evaporation, clean-in-place, effluent and digestion — and the refrigerant leak that routinely outweighs the electricity that ran the plant.
Freezing is modelled on latent heat and the actual water fraction rather than a flat kWh per kilogram, and refrigerant loss is charged at the gas's own GWP — which is where a cold store's footprint usually turns out to sit.
Not covered. Agricultural inputs are out of scope; a crop's footprint has to come from your supplier.
15 processes · 17 materialsSee what is in it
Processes
- Pasteurising / sterilising / retort
- Sterilisation and autoclaving
- Baking / roasting / frying
- Extrusion cooking
- Freezing and chilling
- Chilling / freezing
- Freeze drying (lyophilisation)
- Spray drying
- Homogenising and high-pressure processing
- Evaporation / concentration
- Cleaning / CIP / washing
- Effluent treatment
- Fermentation
- Anaerobic digestion
- Composting
Refrigerants GWP and typical duty, including the gases being phased down
- Sulphur hexafluoride (SF6)
- HFC-143a
- R507A
- R404A
- HFC-125
- R410A
- R407A
- HCFC-22/R22 = chlorodifluoromethane
- R407C
- HFC-134a
- HFC-32
- R600A = isobutane
- R1234yf*
- R1234ze*
- Carbon dioxide
- R290 = propane
- R717 = ammonia
Textiles, apparel and footwear
Ring, open-end and melt spinning, weaving, knitting, batch and continuous dyeing, printing, nonwovens, scouring and washing, finishing, cut-make-trim, tanning and footwear assembly.
Dyeing temperature follows the fibre rather than the machine, so polyester and cotton on the same line are not charged alike, and yarn count converts between tex and Ne instead of being asked for twice.
Not covered. Fibre production is deliberately unpriced — origin decides cotton and wool more than anything a mill does.
14 processes · 8 materialsSee what is in it
Processes
- Ring spinning
- Open-end (rotor) spinning
- Melt spinning (synthetic filament)
- Weaving
- Knitting
- Batch dyeing (exhaust)
- Continuous dyeing (pad-batch, pad-steam)
- Textile printing
- Nonwoven web forming
- Scouring, bleaching and washing
- Textile wet processing
- Cut, make and trim
- Footwear assembly
- Tanning and leather finishing
Fibres moisture regain, dye class and dyeing temperature
- Cotton
- Polyester
- Wool
- Viscose / modal / lyocell
- Nylon / polyamide fibre
- Acrylic
- Elastane / spandex
- Flax / linen
Construction and building products
Glass melting, forming and annealing, ceramic pressing, slip casting, kiln firing and glazing, mineral wool fiberising, rigid foam board lamination and ready-mix batching — priced against third-party verified EN 15804 declarations, split by life-cycle module and reported with the spread across the declarations behind each one.
Each construction figure carries the number of declarations behind it and its interquartile range, so a median is never mistaken for a fact, and end-of-life is measured per route with module D reported separately and never subtracted from the total. Insulation is held by thermal conductivity and density rather than by mass alone, because the building buys a THERMAL RESISTANCE: two products at the same R can differ sixfold in weight, so any comparison drawn per kilogram ranks them backwards.
Not covered. The European figures are EU and German geography; a UK-specific EPD from your supplier beats them. Blowing agents are not priced — a rigid foam's agent can outweigh everything else about it, and its GWP has to come from the board maker.
10 processes · 61 materialsSee what is in it
Processes
- Glass melting
- Container forming (blow and blow, press and blow)
- Annealing and toughening
- Kiln firing (ceramic, lime)
- Slip casting
- Dry and isostatic pressing
- Glazing and decorating
- Mineral wool fiberising
- Foam board lamination (XPS, PIR)
- Ready-mix batching
European construction factors EN 15804 A1–A3, each with the declaration count and quartile spread behind it
- Mortars and concrete
- Bricks, blocks and masonry
- Aggregates
- Asphalt
- Steel and iron
- Aluminium
- Stainless steel
- Plastic floor coverings
- Plastic profile
- Plastic pipe
- Plastic film and nonwoven
- Roofing membrane
- Sealants
- Mineral wool insulation
- Solid timber
- Wood-based panels
- Wood flooring
- Paints, lacquers and stains
- Facade paints
- Reaction resins
Measured end-of-life families route-by-route, with module D reported apart and never netted off
- Electrical equipment
- Mortars and concrete
- Steel and iron
- Bricks, blocks and masonry
- Heating equipment
- Seals and gaskets
- Plastic floor coverings
- Aluminium
- Doors and gates
- Composite system components
- Cements and binders
- Reaction resins
- Sanitary equipment
- Stainless steel
- Paints, lacquers and stains
- Plastic pipe
- Plastic profile
- Plastic film and nonwoven
- Wood-based panels
- Ventilation and air-conditioning equipment
- Wood flooring
- Polyethylene insulation
- Wood-wool board
- Straw insulation
Glasses melting energy and cullet response
- Soda-lime container glass
- Borosilicate glass
Ceramics firing temperature and body composition
- Earthenware / structural clay
- Porcelain / vitreous china
- Cement raw meal
Insulation declared lambda and density, so a thermal duty converts to a thickness and a mass
- Glass wool insulation
- Stone wool insulation
- EPS insulation board
- XPS insulation board
- PIR insulation board
- Wood fibre insulation board
- Cellulose loose-fill insulation
Concrete binders clinker content against the test age the saving depends on
- CEM I (Portland cement only)
- 30% GGBS
- 50% GGBS
- 70% GGBS
- 30% fly ash (PFA)
Metals and engineering
Sand, high-pressure die and investment casting, forging, rolling and drawing, stamping, machining, welding, sintering, additive manufacturing, heat treatment, plating, galvanising, powder coating and shot blasting.
Cutting energy is derived from specific cutting energy and the volume actually removed, so a part machined from solid and a near-net forging separate on physics rather than on a category average.
Not covered. Copper and zinc are priced only on a European assessment; elsewhere they need a supplier figure.
16 processes · 6 materialsSee what is in it
Processes
- Casting (route not stated)
- Sand casting
- High-pressure die casting
- Investment casting
- Forging
- Rolling / drawing
- Stamping / pressing
- Machining
- Welding / joining
- Heat treatment / annealing
- Sintering / powder metallurgy
- Additive manufacturing
- Plating / anodising
- Hot-dip galvanising
- Powder coating
- Shot blasting and surface preparation
Metals melting point, specific cutting energy and recycled-route response
- Aluminium
- Carbon steel
- Stainless steel
- Copper
- Cast iron
- Zinc
Chemicals and process industry
Distillation, evaporation, crystallisation, filtration, centrifugation, solvent extraction, absorption and stripping, ion exchange, membrane separation, electrolysis, milling and grinding, granulation, tabletting, spray drying, reaction and bio-recovery.
Duties come from thermophysical properties — latent heats, heat capacities, reaction enthalpy — and multiple-effect evaporation is credited for the effects it actually has, rather than every column being charged the same kWh per tonne.
Not covered. Speciality chemical routes need your own mass balance; the library models unit operations, not syntheses.
19 processesSee what is in it
Processes
- Distillation / solvent recovery
- Evaporation / concentration
- Crystallisation
- Filtration / dewatering
- Centrifugation
- Solvent extraction
- Absorption and stripping
- Ion exchange and adsorption
- Membrane separation
- Batch reaction
- Electrolysis
- Spray drying
- Coarse milling and crushing
- Fine grinding and micronising
- Granulation / agglomeration
- Mixing / blending
- Tabletting and encapsulation
- Downstream recovery (broth to product)
- Enzymatic conversion
Rubber, composites and adhesives
Compression moulding and curing, pultrusion, resin transfer moulding and infusion, filament winding, autoclave and prepreg cure, coating and potting — with elastomers, composite systems and formulated coatings, adhesives and inks.
Cure time is computed rather than assumed, and thermoset scrap is treated as thermoset: it cannot be reground, so it is never quietly credited back the way a thermoplastic runner is.
Not covered. Natural rubber, silicone and polyurethane are recognised and left to your supplier's figure.
8 processes · 24 materialsSee what is in it
Processes
- Compression moulding
- Curing / stoving oven
- Pultrusion / composite lay-up
- Resin transfer moulding and infusion
- Filament winding
- Autoclave and prepreg cure
- Coating / painting
- Conformal coating and potting
Elastomers cure and scorch temperature, filler loading
- Natural rubber (NR)
- Styrene-butadiene rubber (SBR)
- EPDM
- Silicone rubber
- Thermoplastic elastomer (TPE/TPV)
Composite systems fibre and matrix, fibre fraction, cure route
- Glass fibre / polyester (GRP)
- Glass fibre / epoxy
- Carbon fibre / epoxy (CFRP)
- Natural fibre composite (flax, hemp, jute)
- Glass fibre / polypropylene (thermoplastic composite)
Coatings, adhesives and inks solids content and transfer efficiency — what is applied versus what is bought
- Solvent paint, conventional spray gun
- Solvent paint, HVLP gun
- Waterborne paint, HVLP
- Electrostatic liquid coating
- Powder coating with reclaim
- UV-cure coating
- Solvent-based adhesive
- Waterborne adhesive
- Hot-melt adhesive
- Reactive two-part adhesive (epoxy, PU)
- Pressure-sensitive adhesive
- Solvent-based ink
- Water-based ink
- UV-cure ink
Electronics and assembly
SMT line and PCB assembly, reflow and wave soldering, conformal coating and potting, final assembly and packing, and the compressed air that runs most of it — with the component classes where an electronics footprint actually concentrates.
Components are priced per piece rather than per kilogram, because a die weighs almost nothing and carries almost everything; a mass-based figure gets an electronic assembly wrong by orders of magnitude in the flattering direction.
Not covered. Semiconductor fabrication is not modelled — a die's own footprint has to come from the component maker.
5 processes · 7 materialsSee what is in it
Processes
- PCB assembly (SMT line)
- Reflow and wave soldering
- Conformal coating and potting
- Assembly and packing
- Compressed air
Component classes per-piece footprint, where a mass-based figure would mislead
- Integrated circuit / semiconductor die
- Printed circuit board (bare)
- Lithium-ion cell or pack
- LCD or OLED display
- Passive components (resistors, capacitors, inductors)
- Connectors, cable and wiring harness
- Populated board (PCBA)
Underneath all of it: 101 processes, 1,652 published UK factors, 8 selectable geographies pricing 654 materials, 43 EN 15804 indicators — impacts, resources, waste and output flows, so a pasted declaration is read whole rather than half-dropped — plus 14 air pollutants and 84 material property records. Beside them, spend-based screening for the UK, the US and 49 world regions — kept behind a refusal, because a sector average and a bill of materials measure the same supply chain twice. A material the chosen geography cannot price becomes a question with a named source to ask, never a silent substitution.
What sits behind the library
The figures above are the part that reaches a client. Behind them is a reference corpus assembled from the public and open databases — and, just as deliberately, a written record of the ones that could not be taken and exactly why.
- 561,509 characterised results across 11,947 Swiss datasets, each scored on three impact methods at once — IPCC 2021, EF 3.1 and Ecological Scarcity. Validated against physics rather than trusted: steel 2.14, primary aluminium 8.80, Portland cement 0.718 kg CO₂e/kg.
- 2.2 million characterisation factors over 48 impact methods, and the version history of eleven method releases behind them. Choosing which release to build on is a methodological decision, so every consecutive pair was compared before moving: eleven renames and consolidations, one genuine removal.
- 812,979 construction indicator records from German environmental product declarations, which is where the vocabulary comes from that lets a pasted declaration be read at all.
- Nineteen openLCA databases opened, including one national agricultural repository recorded elsewhere as unreachable. They are Derby databases rather than document archives, and reading them needed a Java runtime that only became available once the desktop tool was installed.
Two of those nineteen are now geographies you can price in. The Swiss federal database arrived already characterised, so it needed no flow mapping: it became a selectable geography of 57materials, each carrying the publisher’s own statement of what the dataset does and does not include, over a further 2,816 process datasets — grid mixes for a hundred-odd countries, heat, freight by tonne-kilometre and waste treatment.
The European Commission’s own reference database needed more than that. Its inventories and its characterisation factors sit inside one archive, so its flows match by construction rather than by mapping, and 31 materials were computed from them here — including concrete per kilogram, which the Swiss set declares by volume and cannot price. Three independent databases on three different methods now price the commodity polymers, and they land within a third of one another. That is the only real check there is on arithmetic we did ourselves.
The rest of that corpus is not priced, and the distinction is the point. An inventory of what a process emits is not an answer until a characterisation method on the same elementary-flow list is matched to it — and the method packs share as few as zero flow identifiers with the inventories they would have to characterise. A quarter of the flows can be bridged by name, which is not enough: the other three quarters would contribute nothing while the total looked complete. So those datasets are held, catalogued and openly marked as inventory, rather than converted into figures that would look finished and be short.
1 litre household bottle
Virgin polymer on the wrong side of a tax threshold, and pinch-off flash that is inherent to the process rather than a fault.
It reads what you typed
No spreadsheet. This sentence produced 4 components, each shown next to the words it came from — nothing enters the assessment until you confirm it.
28 g HDPE body; 3 g PP closure; 0.4 g LDPE tamper band; 18 g recycled board carton outer
- HDPE body28 ghighfrom “28 g HDPE body”
- PP closure3 ghighfrom “3 g PP closure”
- LDPE tamper band0.4 ghighfrom “0.4 g LDPE tamper band”
- recycled board carton outer18 ghighfrom “18 g recycled board carton outer”
It asks only what moves the number
4 questions, ranked by how far your answer could shift the result. Every one can be declined — and declining produces a stated assumption, not a silent default.
- HIGH±0.037 kgIs “HDPE body” virgin or recycled?HDPE (incl. forming) — closed-loop (recycled)HDPE (incl. forming) — primaryI don’t have this — assume and tell me what
- HIGH±0.004 kgIs “PP closure” virgin or recycled?PP (incl. forming) — closed-loop (recycled)PP (incl. forming) — primaryI don’t have this — assume and tell me what
- MEDIUM±0.003 kgHow far do your main materials travel to your facility?UK — local (~50 km)UK — regional (~300 km)I don’t have this — assume and tell me what
- HIGH±0.001 kgIs “LDPE tamper band” virgin or recycled?LDPE and LLDPE (incl. forming) — closed-loop (recycled)LDPE and LLDPE (incl. forming) — primaryI don’t have this — assume and tell me what
It models the plant, not just the shopping list
A materials-only tool would have stopped at 0.1168 kg. The conversion energy and the scrap are the parts this factory can change next quarter.
- TracedHDPE bodyhotspot63.9%Material use
- Tracedrecycled board carton outerhotspot14.6%Material use
- TracedPP closurehotspot5.7%Material use
- TracedLDPE tamper band0.9%Material use
Extrusion blow moulding · 2.17 kWh per kg · 4.1% extra material bought and binned
It prices every change in both currencies
Carbon for the report, pounds for the person who has to approve it. Levers that save money but no carbon still appear — a zero-carbon tariff does not make wasted electricity free.
- Switch HDPE body to HDPE (incl. forming) — closed-loop (recycled)-27.4%not priced
Recycled HDPE varies in melt-flow index batch to batch; expect a wider MFI spread and possible gel or odour carry-over. Blends to ~30% are usually drop-in for non-food contact; food contact needs a certified decontamination grade.
- Move the plant's electricity to a contracted renewable supply-10.4%not priced
Nothing changes on the shop floor. Note that this saving only exists under market-based accounting: a customer applying a location-based method will still see the grid figure, so keep both and expect to be asked for both.
- Bring extrusion blow moulding energy from 1.80 to 0.7 kWh/kg-4.0%£20k/yr
Pinch-off flash is inherent to the process and is the reason the scrap band runs high; in-line regrind recovers most of it but not the energy spent making it.
- Take 5% mass out of HDPE body-3.2%£3k/yr
Wall-thickness reduction changes cooling time and part stiffness. Expect a new mould or insert and a drop-test re-qualification — this is a project, not a setting change.
- Cut extrusion blow moulding scrap from 17.0% to 5%-3.0%£6k/yr
Scrap comes from start-up and changeover losses, drift during a run, and rejects at inspection, and each has a different fix. Log it by cause for a few weeks before choosing where to act.
- Switch PP closure to PP (incl. forming) — closed-loop (recycled)-2.8%not priced
Re-qualify the material against your product specification before switching.
- Switch LDPE tamper band to LDPE and LLDPE (incl. forming) — closed-loop (recycled)-0.6%not priced
Re-qualify the material against your product specification before switching.
It watches the regulation while you work
Running from the first keystroke, scoped on sector and material together. It states what each instrument requires and where these figures sit — and issues no compliance verdict, ever.
No compliance verdict. Every provision is transcribed from a primary source and awaiting legal sign-off. Whether an obligation is met rests on facts this tool does not hold.
- UK Plastic Packaging TaxPPT-03recycled content pct
3 components below the 30% threshold: HDPE body (0%), PP closure (0%), LDPE tamper band (0%).
Test is per component (X = A/B, weight of recycled plastic over total plastic). HDPE body: 0% < 30% · PP closure: 0% < 30% · LDPE tamper band: 0% < 30% - UK Plastic Packaging TaxPPT-02tax
£7.18 per 1,000 units, about £14,370 a year at your stated volume.
31.40 g chargeable plastic per unit (HDPE body, PP closure, LDPE tamper band) × £228.82/tonne. - UK Plastic Packaging TaxPPT-04registration threshold
About 62.8 t of plastic packaging a year — at or above the 10 t registration test.
31.40 g plastic per unit × 2,000,000 units = 62.80 t.
None of these instruments sets a carbon limit. The instruments potentially relevant to this product regulate recycled content, recyclability, substances, labelling, design and tonnage. There is no legal CO2e ceiling here to measure your footprint against, and this panel will not invent one. Your 0.1355 kg CO2e per unit is not a compliance number — it is a commercial and design one.
Recycled PET food tray
Already above the recycled-content threshold, so the money is not in the material — it is in the skeletal web that never becomes a tray.
It reads what you typed
No spreadsheet. This sentence produced 3 components, each shown next to the words it came from — nothing enters the assessment until you confirm it.
22 g recycled PET tray, food contact grade; 1.6 g PP film lid; 0.9 g paper label
- recycled PET tray, food contact grade22 ghighfrom “22 g recycled PET tray, food contact grade”
- PP film lid1.6 ghighfrom “1.6 g PP film lid”
- paper label0.9 ghighfrom “0.9 g paper label”
It asks only what moves the number
3 questions, ranked by how far your answer could shift the result. Every one can be declined — and declining produces a stated assumption, not a silent default.
- HIGH±0.002 kgIs “PP film lid” virgin or recycled?PP (incl. forming) — closed-loop (recycled)PP (incl. forming) — primaryI don’t have this — assume and tell me what
- MEDIUM±0.001 kgHow far do your main materials travel to your facility?UK — local (~50 km)UK — regional (~300 km)I don’t have this — assume and tell me what
- HIGH±0.000 kgIs “paper label” virgin or recycled?paper — closed-loop (recycled)paper — primaryI don’t have this — assume and tell me what
It models the plant, not just the shopping list
A materials-only tool would have stopped at 0.0541 kg. The conversion energy and the scrap are the parts this factory can change next quarter.
- Tracedrecycled PET tray, food contact gradehotspot70.6%Material use
- TracedPP film lidhotspot6.0%Material use
- Tracedpaper labelhotspot1.8%Material use
Thermoforming then Printing and converting · 2.07 kWh per kg · 15.2% extra material bought and binned
It prices every change in both currencies
Carbon for the report, pounds for the person who has to approve it. Levers that save money but no carbon still appear — a zero-carbon tariff does not make wasted electricity free.
- Cut thermoforming scrap from 32.0% to 15%-6.0%£28k/yr
Scrap comes from start-up and changeover losses, drift during a run, and rejects at inspection, and each has a different fix. Log it by cause for a few weeks before choosing where to act.
- Bring thermoforming energy from 1.10 to 0.4 kWh/kg-4.6%£45k/yr
Skeletal web between drawn parts is the whole story — nesting efficiency sets the scrap rate far more than machine choice does.
- Take 5% mass out of recycled PET tray-3.5%£11k/yr
Wall-thickness reduction changes cooling time and part stiffness. Expect a new mould or insert and a drop-test re-qualification — this is a project, not a setting change.
- Switch PP film lid to PP (incl. forming) — closed-loop (recycled)-2.9%not priced
Re-qualify the material against your product specification before switching.
- Switch paper label to paper — closed-loop (recycled)-0.4%not priced
Re-qualify the material against your product specification before switching.
- Cut printing and converting scrap from 5.0% to 3%-0.0%£145/yr
Scrap comes from start-up and changeover losses, drift during a run, and rejects at inspection, and each has a different fix. Log it by cause for a few weeks before choosing where to act.
- Move the plant's electricity to a contracted renewable supply-9.6%not priced
Nothing changes on the shop floor. Note that this saving only exists under market-based accounting: a customer applying a location-based method will still see the grid figure, so keep both and expect to be asked for both.
- Bring printing and converting energy from 0.35 to 0.1 kWh/kg-0.0%£438/yr
Make-ready waste per job; short runs are disproportionately wasteful.
It watches the regulation while you work
Running from the first keystroke, scoped on sector and material together. It states what each instrument requires and where these figures sit — and issues no compliance verdict, ever.
No compliance verdict. Every provision is transcribed from a primary source and awaiting legal sign-off. Whether an obligation is met rests on facts this tool does not hold.
- UK Plastic Packaging TaxPPT-03recycled content pct
1 component below the 30% threshold: PP film lid (0%).
Test is per component (X = A/B, weight of recycled plastic over total plastic). PP film lid: 0% < 30% - UK Plastic Packaging TaxPPT-02tax
£0.37 per 1,000 units, about £2,929 a year at your stated volume. Floor, not a total: 1 plastic component (film) is in scope but not yet priced here.
1.600 g chargeable plastic per unit (PP film lid) × £228.82/tonne. - UK Plastic Packaging TaxPPT-04registration threshold
About 188.8 t of plastic packaging a year — at or above the 10 t registration test.
23.60 g plastic per unit × 8,000,000 units = 188.80 t.
None of these instruments sets a carbon limit. The instruments potentially relevant to this product regulate recycled content, recyclability, substances, labelling, design and tonnage. There is no legal CO2e ceiling here to measure your footprint against, and this panel will not invent one. Your 0.0689 kg CO2e per unit is not a compliance number — it is a commercial and design one.
Product preview
What comes back, and how it discloses itself.
A representative example of the product's output shape. It stands in for a live calculation — it is not one.
1 further stage below the 80% cumulative cutoff — shown here rather than silently dropped: Inbound transport.
Carbon only · cradle-to-gate · illustrative example, not a live calculation
From measurement to decision
A hotspot tells you where. We tell you what to do about it.
Knowing that material production carries most of your footprint is the beginning of the work, not the end of it. The question a manufacturer actually has to answer is narrower and harder: change what, by how much, at what cost, and what does it do to the line?
Decision-grade recommendations
Every recommendation carries the three consequences that decide whether it ever happens: what it costs, what it saves, and what it does to the process. A change nobody can afford or qualify is not a recommendation.
Grounded in process engineering
Mixing and compounding, reactors and utilities, heat integration, yield and scrap rates, throughput bottlenecks. The model is of your plant and its constraints — not only of your inventory.
Prescriptive, ranked and costed
Not a dashboard showing where emissions sit. A sequenced programme: what to do next, the expected return, the likely reduction, and how hard it is to implement.
Replace 15% of virgin carbon black with recovered carbon black
One change, three consequences, each disclosed. Figures illustrate the form of the answer — they are not a result for your product.
“A plant manager doesn't wake up needing a life-cycle assessment. They wake up needing less steam, less scrap, and a lower raw-material bill.”
The provenance discipline
Most sustainability tools blend confident-sounding numbers from unclear sources. This one refuses to.
The name is the promise: a gauge is only worth having if it reads true. Every figure TrueGauge produces carries one of three disclosure tiers — visible on the figure itself, not buried in a methodology appendix. A recommendation you cannot audit is not a recommendation you can act on.
What it will not do
The limits are here rather than in a footnote, because knowing them before you commit data is worth more than discovering them after.
- It is a screening assessment. Not certified, not third-party verified, not an EPD — and every report says so on every page.
- It issues no compliance verdicts. The scan describes instruments and positions your figures against them. Whether you meet an obligation rests on facts about your business the tool does not hold.
- No instrument in the library sets a carbon limit. These regulate recycled content, recyclability, substances, labelling and tonnage — not CO₂e. Your footprint is a commercial number, and the tool says so rather than inventing a threshold.
- The factor library is deliberately small. Anything it does not carry becomes a question or your own figure — never a confident guess. Both examples above use client-supplied factors for exactly that reason.
- Screening bands are not measurements. Process energy and price bands exist to be replaced by your meter and your invoice, and the result always says which one it used.