Skip to content
PunarGen

Plastic film: what the published libraries say

The 2 published figures for Plastic film span a factor of 1.14 — the highest is 14% above the lowest. All are competently produced; none is a mistake. They come from 2 geographies, and a material's footprint follows the grid and the process mix of the place it was made as much as the material itself. They are characterised under 2 methods (DESNZ, EF 3.1), which is enough on its own to move a figure without anything physical changing. System boundary is usually the largest term: a figure quoted at the granulate stage and one quoted after forming answer different questions, and the row labels below say which each one is.

Lowest published
2.91
Highest published
3.33
Libraries
2
kg CO₂e per kg
A published range, not an uncertainty band — and deliberately no average.
kg CO₂e/kgLibraryMethodWhat the source calls it
2.91United Kingdom
DESNZ GHG Conversion Factors 2026
DESNZaverage plastic film — primary
Published combustion and material figures. For energy this product adds the well-to-tank terms the published set reports separately.
3.33Europe — construction and building products
Ökobaudat (BMWSB)
EF 3.1Plastic film and nonwoven
declarations span 2.28–7.14 over 16
Median across real product declarations, module A1-A3 only. Recycled content is apportioned by the Circular Footprint Formula.

Which one should you use?

The one whose geography and system boundary match your question — not the lowest, and not an average of them. If your supplier is in Europe, a UK or Australian figure is describing a different grid and a different process mix. If your bill of materials is granulate, a figure quoted after forming is counting a step you have not paid for yet. The prototype picks one and names which.

Attribution

  • Contains public sector information licensed under the Open Government Licence v3.0.

Reproduced for reference under the terms of the respective licences. Not offered for resale.

Use this

Picking the right Plastic film figure is only half of a footprint — the other half is how much of it your product contains. To put the two together, run a bill of materials containing Plastic film through the free carbon calculator — no sign-up, and it runs in your browser. For the whole picture, including the process and its scrap, model the whole route in the prototype, or see what TrueGauge does for a manufacturer.

Early access

Request early access.

Both products are pre-launch. We're working with an early group of manufacturers, architects, builders and sustainability teams to shape what gets built first — tell us which platform is relevant to you.

  • Shape the roadmap

    Tell us which decisions you need supported, and what the data has to do to be usable.

  • First access

    Be first in line as each platform opens to early users.

  • A direct line to the team

    Early conversations happen with the people building it, not a sales funnel.

Register interest

Which platform? *

This registers interest in early access — both platforms are pre-launch, so this isn't a product signup or a purchase.