Plaster: what the published libraries say
The 3 published figures for Plaster span a factor of 1.49 — the highest is 49% above the lowest. All are competently produced; none is a mistake. They come from 3 geographies, and a material's footprint follows the grid and the process mix of the place it was made as much as the material itself. They are characterised under 3 methods (ReCiPe 2016, AR5 / NGA, IPCC 2021), which is enough on its own to move a figure without anything physical changing. System boundary is usually the largest term: a figure quoted at the granulate stage and one quoted after forming answer different questions, and the row labels below say which each one is.
| kg CO₂e/kg | Library | Method | What the source calls it |
|---|---|---|---|
| 0.11 | Europe — ELCD reference data ELCD 3.2 (European Commission reference database) | ReCiPe 2016 | Gypsum plaster (CaSO4 beta hemihydrates), production mix, at plant, technology mix of natural gypsum (45%) and gypsum from flue gas desulphurisation (55%), grinded and purified product Characterised from ELCD's own aggregated inventory on ReCiPe 2016 Midpoint (H), taken whole. Cradle-to-gate, production route with no end-of-life credit netted in. Other indicators use ReCiPe's units — fossil resource use in kg oil eq, not the MJ of an EN 15804 declaration — so they must not be matched to a declaration by name. |
| 0.148 | Australia AusLCI Carbon Emission Factors V48 | AR5 / NGA | Plaster Carbon-neutrality basis: biogenic CO2 is excluded. Infrastructure and capital goods are excluded from every AusLCI row, so this must not be compared against a figure that includes them. |
| 0.163 | Switzerland and Europe — BAFU BAFU:2026 v1 (Swiss Federal Office for the Environment) | IPCC 2021 | Gypsum plaster, at plant BAFU states the dataset covers: <null>. Primary production route, CH geography. IPCC 2021 GWP100; the same dataset on EF 3.1 is 0.1633 kg CO2e/kg, which is a different characterisation model and must not be added to this figure. Database of the Swiss Federal Administration, BAFU:2026, Federal Office for the Environment, 2026. |
Which one should you use?
The one whose geography and system boundary match your question — not the lowest, and not an average of them. If your supplier is in Europe, a UK or Australian figure is describing a different grid and a different process mix. If your bill of materials is granulate, a figure quoted after forming is counting a step you have not paid for yet. The prototype picks one and names which.
Attribution
- Database of the Swiss Federal Administration, BAFU:2026, Federal Office for the Environment, 2026
Reproduced for reference under the terms of the respective licences. Not offered for resale.
Use this
Picking the right Plaster figure is only half of a footprint — the other half is how much of it your product contains. To put the two together, run a bill of materials containing Plaster through the free carbon calculator — no sign-up, and it runs in your browser. For the whole picture, including the process and its scrap, model the whole route in the prototype, or see what TrueGauge does for a manufacturer.
Early access
Request early access.
Both products are pre-launch. We're working with an early group of manufacturers, architects, builders and sustainability teams to shape what gets built first — tell us which platform is relevant to you.
Shape the roadmap
Tell us which decisions you need supported, and what the data has to do to be usable.
First access
Be first in line as each platform opens to early users.
A direct line to the team
Early conversations happen with the people building it, not a sales funnel.