Skip to content
PunarGen

Galvanised steel: what the published libraries say

The 2 published figures for Galvanised steel span a factor of 1.44 — the highest is 44% above the lowest. All are competently produced; none is a mistake. They come from 2 geographies, and a material's footprint follows the grid and the process mix of the place it was made as much as the material itself. They are characterised under 2 methods (ReCiPe 2016, Base Carbone), which is enough on its own to move a figure without anything physical changing. System boundary is usually the largest term: a figure quoted at the granulate stage and one quoted after forming answer different questions, and the row labels below say which each one is.

Lowest published
2.55
Highest published
3.67
Libraries
2
kg CO₂e per kg
A published range, not an uncertainty band — and deliberately no average.
kg CO₂e/kgLibraryMethodWhat the source calls it
2.55Europe — ELCD reference data
ELCD 3.2 (European Commission reference database)
ReCiPe 2016Steel hot dip galvanized (ILCD), production mix, at plant, blast furnace route, 1kg, typical thickness between 0.3 - 3 mm. typical width between 600 - 2100 mm.
Characterised from ELCD's own aggregated inventory on ReCiPe 2016 Midpoint (H), taken whole. Cradle-to-gate, production route with no end-of-life credit netted in. Other indicators use ReCiPe's units — fossil resource use in kg oil eq, not the MJ of an EN 15804 declaration — so they must not be matched to a declaration by name.
3.67France
ADEME Base Carbone® 2026
Base CarboneStake galvanized steel
Carbon-neutrality basis: biogenic CO₂ is reported separately and held out of this figure. ADEME did not rate this factor's data quality. ADEME states an uncertainty of ±40%.

Which one should you use?

The one whose geography and system boundary match your question — not the lowest, and not an average of them. If your supplier is in Europe, a UK or Australian figure is describing a different grid and a different process mix. If your bill of materials is granulate, a figure quoted after forming is counting a step you have not paid for yet. The prototype picks one and names which.

Attribution

  • Source: ADEME, Base Carbone®, Licence Ouverte / Open Licence 2.0.

Reproduced for reference under the terms of the respective licences. Not offered for resale.

Use this

Picking the right Galvanised steel figure is only half of a footprint — the other half is how much of it your product contains. To put the two together, run a bill of materials containing Galvanised steel through the free carbon calculator — no sign-up, and it runs in your browser. For the whole picture, including the process and its scrap, model the whole route in the prototype, or see what TrueGauge does for a manufacturer.

Early access

Request early access.

Both products are pre-launch. We're working with an early group of manufacturers, architects, builders and sustainability teams to shape what gets built first — tell us which platform is relevant to you.

  • Shape the roadmap

    Tell us which decisions you need supported, and what the data has to do to be usable.

  • First access

    Be first in line as each platform opens to early users.

  • A direct line to the team

    Early conversations happen with the people building it, not a sales funnel.

Register interest

Which platform? *

This registers interest in early access — both platforms are pre-launch, so this isn't a product signup or a purchase.