Skip to content
PunarGen

Ethylene: what the published libraries say

The 2 published figures for Ethylene span a factor of 1.42 — the highest is 42% above the lowest. All are competently produced; none is a mistake. They come from 2 geographies, and a material's footprint follows the grid and the process mix of the place it was made as much as the material itself. They are characterised under 2 methods (ReCiPe 2016, AR5 / NGA), which is enough on its own to move a figure without anything physical changing. System boundary is usually the largest term: a figure quoted at the granulate stage and one quoted after forming answer different questions, and the row labels below say which each one is.

Lowest published
1.42
Highest published
2.02
Libraries
2
kg CO₂e per kg
A published range, not an uncertainty band — and deliberately no average.
kg CO₂e/kgLibraryMethodWhat the source calls it
1.42Europe — ELCD reference data
ELCD 3.2 (European Commission reference database)
ReCiPe 2016Ethene (Ethylene), production mix, at plant, from steam cracking, gaseous
Characterised from ELCD's own aggregated inventory on ReCiPe 2016 Midpoint (H), taken whole. Cradle-to-gate, production route with no end-of-life credit netted in. Other indicators use ReCiPe's units — fossil resource use in kg oil eq, not the MJ of an EN 15804 declaration — so they must not be matched to a declaration by name.
2.02Australia
AusLCI Carbon Emission Factors V48
AR5 / NGAEthylene
Carbon-neutrality basis: biogenic CO2 is excluded. Infrastructure and capital goods are excluded from every AusLCI row, so this must not be compared against a figure that includes them.

Which one should you use?

The one whose geography and system boundary match your question — not the lowest, and not an average of them. If your supplier is in Europe, a UK or Australian figure is describing a different grid and a different process mix. If your bill of materials is granulate, a figure quoted after forming is counting a step you have not paid for yet. The prototype picks one and names which.

Use this

Picking the right Ethylene figure is only half of a footprint — the other half is how much of it your product contains. To put the two together, run a bill of materials containing Ethylene through the free carbon calculator — no sign-up, and it runs in your browser. For the whole picture, including the process and its scrap, model the whole route in the prototype, or see what TrueGauge does for a manufacturer.

Early access

Request early access.

Both products are pre-launch. We're working with an early group of manufacturers, architects, builders and sustainability teams to shape what gets built first — tell us which platform is relevant to you.

  • Shape the roadmap

    Tell us which decisions you need supported, and what the data has to do to be usable.

  • First access

    Be first in line as each platform opens to early users.

  • A direct line to the team

    Early conversations happen with the people building it, not a sales funnel.

Register interest

Which platform? *

This registers interest in early access — both platforms are pre-launch, so this isn't a product signup or a purchase.