Concrete: what the published libraries say
The 4 published figures for Concrete span a factor of 1.89 — the highest is 89% above the lowest. All are competently produced; none is a mistake. They come from 4 geographies, and a material's footprint follows the grid and the process mix of the place it was made as much as the material itself. They are characterised under 4 methods (EF 3.1, Base Carbone, DESNZ, ReCiPe 2016), which is enough on its own to move a figure without anything physical changing. System boundary is usually the largest term: a figure quoted at the granulate stage and one quoted after forming answer different questions, and the row labels below say which each one is.
| kg CO₂e/kg | Library | Method | What the source calls it |
|---|---|---|---|
| 0.0644 | Europe — construction and building products Ökobaudat (BMWSB) | EF 3.1 | Mortars and concrete declarations span 0.0538–0.0743 over 478 Median across real product declarations, module A1-A3 only. Recycled content is apportioned by the Circular Footprint Formula. |
| 0.088 | France ADEME Base Carbone® 2026 | Base Carbone | Concrete · (C25/30CEM II) Carbon-neutrality basis: biogenic CO₂ is reported separately and held out of this figure. ADEME did not rate this factor's data quality. ADEME states an uncertainty of ±20%. |
| 0.119 | United Kingdom DESNZ GHG Conversion Factors 2026 | DESNZ | Concrete — primary Published combustion and material figures. For energy this product adds the well-to-tank terms the published set reports separately. |
| 0.122 | Europe — ELCD reference data ELCD 3.2 (European Commission reference database) | ReCiPe 2016 | Pre-cast concrete, production mix, at plant, minimum reinforcement, concrete type C20/25, without consideration of casings Characterised from ELCD's own aggregated inventory on ReCiPe 2016 Midpoint (H), taken whole. Cradle-to-gate, production route with no end-of-life credit netted in. Other indicators use ReCiPe's units — fossil resource use in kg oil eq, not the MJ of an EN 15804 declaration — so they must not be matched to a declaration by name. |
Which one should you use?
The one whose geography and system boundary match your question — not the lowest, and not an average of them. If your supplier is in Europe, a UK or Australian figure is describing a different grid and a different process mix. If your bill of materials is granulate, a figure quoted after forming is counting a step you have not paid for yet. The prototype picks one and names which.
Attribution
- Source: ADEME, Base Carbone®, Licence Ouverte / Open Licence 2.0.
- Contains public sector information licensed under the Open Government Licence v3.0.
Reproduced for reference under the terms of the respective licences. Not offered for resale.
Use this
Picking the right Concrete figure is only half of a footprint — the other half is how much of it your product contains. To put the two together, run a bill of materials containing Concrete through the free carbon calculator — no sign-up, and it runs in your browser. For the whole picture, including the process and its scrap, model the whole route in the prototype, or see what TrueGauge does for a manufacturer.
Early access
Request early access.
Both products are pre-launch. We're working with an early group of manufacturers, architects, builders and sustainability teams to shape what gets built first — tell us which platform is relevant to you.
Shape the roadmap
Tell us which decisions you need supported, and what the data has to do to be usable.
First access
Be first in line as each platform opens to early users.
A direct line to the team
Early conversations happen with the people building it, not a sales funnel.