Skip to content
PunarGen

Clinker: what the published libraries say

The 2 published figures for Clinker span a factor of 1.26 — the highest is 26% above the lowest. All are competently produced; none is a mistake. They come from 2 geographies, and a material's footprint follows the grid and the process mix of the place it was made as much as the material itself. They are characterised under 2 methods (IPCC 2021, AR5 / NGA), which is enough on its own to move a figure without anything physical changing. System boundary is usually the largest term: a figure quoted at the granulate stage and one quoted after forming answer different questions, and the row labels below say which each one is.

Lowest published
0.783
Highest published
0.987
Libraries
2
kg CO₂e per kg
A published range, not an uncertainty band — and deliberately no average.
kg CO₂e/kgLibraryMethodWhat the source calls it
0.783Switzerland and Europe — BAFU
BAFU:2026 v1 (Swiss Federal Office for the Environment)
IPCC 2021Clinker, at plant
BAFU states the dataset covers: Included activities start from the reception of traditional and alternative fuels and raw materials at the factory gate and it…. Primary production route, CH geography. IPCC 2021 GWP100; the same dataset on EF 3.1 is 0.7834 kg CO2e/kg, which is a different characterisation model and must not be added to this figure. Database of the Swiss Federal Administration, BAFU:2026, Federal Office for the Environment, 2026.
0.987Australia
AusLCI Carbon Emission Factors V48
AR5 / NGACement clinker
Carbon-neutrality basis: biogenic CO2 is excluded. Infrastructure and capital goods are excluded from every AusLCI row, so this must not be compared against a figure that includes them.

Which one should you use?

The one whose geography and system boundary match your question — not the lowest, and not an average of them. If your supplier is in Europe, a UK or Australian figure is describing a different grid and a different process mix. If your bill of materials is granulate, a figure quoted after forming is counting a step you have not paid for yet. The prototype picks one and names which.

Attribution

  • Database of the Swiss Federal Administration, BAFU:2026, Federal Office for the Environment, 2026

Reproduced for reference under the terms of the respective licences. Not offered for resale.

Use this

Picking the right Clinker figure is only half of a footprint — the other half is how much of it your product contains. To put the two together, run a bill of materials containing Clinker through the free carbon calculator — no sign-up, and it runs in your browser. For the whole picture, including the process and its scrap, model the whole route in the prototype, or see what TrueGauge does for a manufacturer.

Early access

Request early access.

Both products are pre-launch. We're working with an early group of manufacturers, architects, builders and sustainability teams to shape what gets built first — tell us which platform is relevant to you.

  • Shape the roadmap

    Tell us which decisions you need supported, and what the data has to do to be usable.

  • First access

    Be first in line as each platform opens to early users.

  • A direct line to the team

    Early conversations happen with the people building it, not a sales funnel.

Register interest

Which platform? *

This registers interest in early access — both platforms are pre-launch, so this isn't a product signup or a purchase.