Skip to content
PunarGen

Cement: what the published libraries say

3 libraries carry something called Cement, and their figures span a factor of 18.4. A gap that wide is rarely a disagreement — it usually means the rows describe different products under one name: a raw input against a finished article, a mix against the material itself, or one grade against another. Read the row labels below before taking any of these numbers: they say what each source actually measured, and they are the reason the spread looks the way it does. Nothing here should be averaged.

Lowest published
0.0506
Highest published
0.93
Libraries
3
kg CO₂e per kg
A published range, not an uncertainty band — and deliberately no average.

Read the row labels before taking a number. A spread this wide between reputable libraries is almost never a disagreement. It is usually one name covering different things — a raw input against a finished article, a mix against the material itself, or one grade against another. The labels below say what each source actually measured.

kg CO₂e/kgLibraryMethodWhat the source calls it
0.0506France
ADEME Base Carbone® 2026
Base CarboneGravel/cement mix · manufacture
Carbon-neutrality basis: biogenic CO₂ is reported separately and held out of this figure. ADEME did not rate this factor's data quality. ADEME states an uncertainty of ±20%.
0.73Switzerland and Europe — BAFU
BAFU:2026 v1 (Swiss Federal Office for the Environment)
IPCC 2021CEM I cement, at plant
BAFU states the dataset covers: The dataset describes the production of cement (CEM I) in Switzerland and covers the representative production mix of CEM I 42.5…. Primary production route, CH geography. IPCC 2021 GWP100; the same dataset on EF 3.1 is 0.7297 kg CO2e/kg, which is a different characterisation model and must not be added to this figure. Database of the Swiss Federal Administration, BAFU:2026, Federal Office for the Environment, 2026.
0.93Australia
AusLCI Carbon Emission Factors V48
AR5 / NGAGeneral purpose cement
Carbon-neutrality basis: biogenic CO2 is excluded. Infrastructure and capital goods are excluded from every AusLCI row, so this must not be compared against a figure that includes them.

Which one should you use?

The one whose geography and system boundary match your question — not the lowest, and not an average of them. If your supplier is in Europe, a UK or Australian figure is describing a different grid and a different process mix. If your bill of materials is granulate, a figure quoted after forming is counting a step you have not paid for yet. The prototype picks one and names which.

Attribution

  • Source: ADEME, Base Carbone®, Licence Ouverte / Open Licence 2.0.
  • Database of the Swiss Federal Administration, BAFU:2026, Federal Office for the Environment, 2026

Reproduced for reference under the terms of the respective licences. Not offered for resale.

Use this

Picking the right Cement figure is only half of a footprint — the other half is how much of it your product contains. To put the two together, run a bill of materials containing Cement through the free carbon calculator — no sign-up, and it runs in your browser. For the whole picture, including the process and its scrap, model the whole route in the prototype, or see what TrueGauge does for a manufacturer.

Early access

Request early access.

Both products are pre-launch. We're working with an early group of manufacturers, architects, builders and sustainability teams to shape what gets built first — tell us which platform is relevant to you.

  • Shape the roadmap

    Tell us which decisions you need supported, and what the data has to do to be usable.

  • First access

    Be first in line as each platform opens to early users.

  • A direct line to the team

    Early conversations happen with the people building it, not a sales funnel.

Register interest

Which platform? *

This registers interest in early access — both platforms are pre-launch, so this isn't a product signup or a purchase.