Skip to content
PunarGen

Aggregates: what the published libraries say

5 libraries carry something called Aggregates, and their figures span a factor of 6.1. A gap that wide is rarely a disagreement — it usually means the rows describe different products under one name: a raw input against a finished article, a mix against the material itself, or one grade against another. Read the row labels below before taking any of these numbers: they say what each source actually measured, and they are the reason the spread looks the way it does. Nothing here should be averaged.

Lowest published
0.00344
Highest published
0.021
Libraries
5
kg CO₂e per kg
A published range, not an uncertainty band — and deliberately no average.

Read the row labels before taking a number. A spread this wide between reputable libraries is almost never a disagreement. It is usually one name covering different things — a raw input against a finished article, a mix against the material itself, or one grade against another. The labels below say what each source actually measured.

kg CO₂e/kgLibraryMethodWhat the source calls it
0.00344Europe — ELCD reference data
ELCD 3.2 (European Commission reference database)
ReCiPe 2016Gravel 2/32, production mix, at plant, wet and dry quarry, undried
Characterised from ELCD's own aggregated inventory on ReCiPe 2016 Midpoint (H), taken whole. Cradle-to-gate, production route with no end-of-life credit netted in. Other indicators use ReCiPe's units — fossil resource use in kg oil eq, not the MJ of an EN 15804 declaration — so they must not be matched to a declaration by name.
0.00363Australia
AusLCI Carbon Emission Factors V48
AR5 / NGARecycled aggregate
Carbon-neutrality basis: biogenic CO2 is excluded. Infrastructure and capital goods are excluded from every AusLCI row, so this must not be compared against a figure that includes them.
0.00481Switzerland and Europe — BAFU
BAFU:2026 v1 (Swiss Federal Office for the Environment)
IPCC 2021Gravel, crushed, market mix, at regional storage
BAFU states the dataset covers: This data set accounts for 1 kg of gravel at the regional storage. 19% are from import, 81% are produced in Switzerland. The…. Primary production route, CH geography. IPCC 2021 GWP100; the same dataset on EF 3.1 is 0.004815 kg CO2e/kg, which is a different characterisation model and must not be added to this figure. Database of the Swiss Federal Administration, BAFU:2026, Federal Office for the Environment, 2026.
0.0078United Kingdom
DESNZ GHG Conversion Factors 2026
DESNZAggregates — primary
Published combustion and material figures. For energy this product adds the well-to-tank terms the published set reports separately.
0.021Europe — construction and building products
Ökobaudat (BMWSB)
EF 3.1Aggregates
declarations span 0.00387–0.283 over 26
Median across real product declarations, module A1-A3 only. Recycled content is apportioned by the Circular Footprint Formula.

Which one should you use?

The one whose geography and system boundary match your question — not the lowest, and not an average of them. If your supplier is in Europe, a UK or Australian figure is describing a different grid and a different process mix. If your bill of materials is granulate, a figure quoted after forming is counting a step you have not paid for yet. The prototype picks one and names which.

Attribution

  • Database of the Swiss Federal Administration, BAFU:2026, Federal Office for the Environment, 2026
  • Contains public sector information licensed under the Open Government Licence v3.0.

Reproduced for reference under the terms of the respective licences. Not offered for resale.

Use this

Picking the right Aggregates figure is only half of a footprint — the other half is how much of it your product contains. To put the two together, run a bill of materials containing Aggregates through the free carbon calculator — no sign-up, and it runs in your browser. For the whole picture, including the process and its scrap, model the whole route in the prototype, or see what TrueGauge does for a manufacturer.

Early access

Request early access.

Both products are pre-launch. We're working with an early group of manufacturers, architects, builders and sustainability teams to shape what gets built first — tell us which platform is relevant to you.

  • Shape the roadmap

    Tell us which decisions you need supported, and what the data has to do to be usable.

  • First access

    Be first in line as each platform opens to early users.

  • A direct line to the team

    Early conversations happen with the people building it, not a sales funnel.

Register interest

Which platform? *

This registers interest in early access — both platforms are pre-launch, so this isn't a product signup or a purchase.